Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15
  1. #1
    Red Devil's Avatar
    Join Date
    Apr 2005
    Location
    Chesterfield/Richmond, VA
    Posts
    1,809

    F/S Parting out EMS 04 GTX SC over 300hp w/B-Kit

    OK, It looks like the best route to go is to part my ski out. What we have is a "COMPLETE" ski as of now. In addition to this I have items such as:

    New Riva 15/19 3 Blade
    58 mm Throttle Body done by Jorge Pugliese in Florida
    New 04 GTX SC LTD Cover (Dark Blue and Grey)
    Black "Shark" Bra (Covers the entire front and bottom)
    Hull Protectors (can be viewed @ www.kwiktec.com
    Dark Blue contoured rubber hull protectors
    Perfect condition 3 injector intake manifold
    Double 5 galon holder that mounts on trailer/includes 2 5 gal containers w/locking bar
    Block guard for 4 tec engines

    If you would be interested in the hull, lets just say that you won't even find marks on the sides of the rub rails. That will give you an idea of the condition...

    The motor is a Nils built with less than 15 hours!!!!!!!!!! and has only run Bombardier oil in it..

    Going this route I will have everything for sale from the hull, motor, EMS, B-kit, drive shaft, 15/20 4 blade, water box, RR Front Engine mount, Skat triple bearing pump w/ss wear ring and adjustable rings, hull parts, rideplate, red digital Dyno Tune Boost gauge and A/F gauge, Garmin gps from the LTD that fits in the glove box, complete 4" rear intake kit with adapter for s/c and filter already mounted in the Lexon plexi, Mint Condition Dark blue front and rear seats, and much more.

    Basically, if you want it I am sure it is on the ski. Please respond with what you may be interested in and a reasonable offer and we can talk.

    If someone wants the motor with EMS, you basically have a 300 plus hp turn key capable of up to 9000 RPM's waiting to be installed. The EMS kit alone was over $3K but definately negotiable.
    Last edited by Red Devil; 07-26-2008 at 10:44 PM. Reason: Change header


  2. #2
    Red Devil's Avatar
    Join Date
    Apr 2005
    Location
    Chesterfield/Richmond, VA
    Posts
    1,809
    Someone is the proud new owner of a carbon fiber seat...

  3. #3
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120
    Pm sent on boost gauge!

  4. #4

    Join Date
    Nov 2007
    Location
    Newcastle, Australia
    Posts
    23
    pm sent for mount & possible wedge

  5. #5
    Red Devil's Avatar
    Join Date
    Apr 2005
    Location
    Chesterfield/Richmond, VA
    Posts
    1,809
    To all who have pm'd, I will respond to each one of them soon, a little busy tonight. Thanks, To answer some of the additional questions,
    here is the following:

    The triton trailer with new LED tail lights and (2) 5 gal gas containers and holder with lock for the containers will be included with the ski.

    It does have the thru hull exhaust with the Rude tip.

    Riva Adjustable Sponsons

    Rotax Racing Intercooler

    Includes seperate 6 Injector with stock 3 Injector intake manifold

    Itemized list of what exactly Nils did to the motor:

    Port and polish
    12 High pressure SeaDoo valve springs
    upgraded Flywheel bolts
    3 RXP Piston Assembly
    Balance Shaft
    Crankshaft
    Output sleeve
    4 Main bearings upper half
    4 Main bearings lower half
    6 Rod bearing half
    2 Thrust washers
    4 Counter shaft bearings
    6 Connecting rod bolts
    1 Timing chain
    1 oil jet
    1 Racing Chain Tensioner
    12 Lightweight spring retainers
    1 Rotax Racing Camshaft
    6 Intake valves
    6 Exhaust valves
    1 Rotax Racing camshaft sprocket
    6 Rocker shaft bolts
    8 Head bolts
    8 O rings
    Last edited by Red Devil; 07-26-2008 at 08:43 PM.

  6. #6

    Join Date
    May 2007
    Location
    Suffolk, VA
    Posts
    79
    +1
    1
    Jay, Thanks For The Seat. It Looks Awesome On The Ski. Rob

  7. #7
    BLACK MAGIC HEADERS hydrojunkie's Avatar
    Join Date
    Jun 2007
    Location
    new york
    Posts
    3,529
    +1
    3
    pm sent

  8. #8
    Red Devil's Avatar
    Join Date
    Apr 2005
    Location
    Chesterfield/Richmond, VA
    Posts
    1,809
    Quote Originally Posted by Madjamr View Post
    Jay, Thanks For The Seat. It Looks Awesome On The Ski. Rob
    Excellent Rob, Make sure you double check that it floats with the way I did it before you go out....

    Thanks!

    Jay

  9. #9
    Doo'n it on the Lake ... GTXDawg's Avatar
    Join Date
    Mar 2008
    Location
    Middle TN
    Posts
    110
    how much for the pump? have an '03 SC that would def appreciate the upgrade to a metal skat!

  10. #10
    Red Devil's Avatar
    Join Date
    Apr 2005
    Location
    Chesterfield/Richmond, VA
    Posts
    1,809
    Quote Originally Posted by GTXDawg View Post
    how much for the pump? have an '03 SC that would def appreciate the upgrade to a metal skat!
    Sent you a PM...

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS - Parts 05 rxp & 04 gtx sc parts cheap
    By Jknauer00 in forum Sea Doo Classifieds
    Replies: 19
    Last Post: 02-03-2015, 05:08 AM
  2. FS - Parts any interest if i parted out an 03 Gtx sc 185 68 hours?
    By lemon4879 in forum Sea Doo 4Tec Skis
    Replies: 11
    Last Post: 06-25-2012, 01:15 PM
  3. FS EMS 04 GTX SC Project
    By bankyf in forum Sea Doo Classifieds
    Replies: 20
    Last Post: 10-07-2009, 12:25 PM
  4. F/S EMS 04 GTX SC over 300hp w/B-Kit
    By Red Devil in forum Sea Doo Classifieds
    Replies: 34
    Last Post: 07-30-2008, 07:46 PM
  5. '04 GTX SC RPM
    By 05Limited in forum 4-Tec Performance
    Replies: 6
    Last Post: 03-18-2006, 09:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •