Results 1 to 3 of 3
  1. #1

    Aqua step on 01 Seadoo GTX

    have a quick question..I bought a New unused Aqua Step on Craigslist. I have the step, hinges etc. but did not have any bolts or AVK inserts. I really don't know which I need to use? I looked at their website but no real help I was looking inside of the seadoo and I don't see how I could possible use bolts and way to get to the nuts in the back cavity of the boat or are the holes tapped?. So I assume I would use AVK inserts..any help or knowledge would be appreciated..

  2. #2
    Master of the Dooniverse
    Join Date
    May 2006
    Schenectady, Ny
    tap drill holes into the ski, tap the fiberglass. it will hold threads in the transom. another option is to pilot drill through and use some self tapping hex screws. seals well around the face of the AS brackets and the screw itself. it will seal just fine.

    be sure you go small enough that the thread geta good bite. threaded part should be 1/4" or 5/16", whateveer is the biggest size that will fit in the AS moutn holes. USe stainless hardware and use flat washers with lock washers.

  3. #3
    Cool..that makes a lot of sense after looking everything over again...will get some hardware tonight...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 99 Yamaha xl1200, or 01 Seadoo GTX DI.
    By macmac in forum Yamaha PWC Performance (2-stroke)
    Replies: 9
    Last Post: 09-12-2017, 07:43 AM
  2. Supercharger removal on 2004 seadoo gtx
    By rmeeks1214 in forum 4-Tec Performance
    Replies: 1
    Last Post: 06-08-2014, 10:18 PM
  3. eBay auction on 1999 seadoo GTX part out
    By Rodneyfaganjr in forum eBay Finds
    Replies: 1
    Last Post: 03-14-2014, 05:07 PM
  4. Aftermarket Wear Ring Replacement on 2006 Seadoo GTX?
    By toxicla in forum Sea Doo Open Discussion
    Replies: 2
    Last Post: 12-10-2012, 09:48 PM
  5. New to Green Hulk. Needs advice on 98 Seadoo GTX Limited
    By pump123$ in forum 2-Stroke Performance
    Replies: 8
    Last Post: 08-30-2006, 09:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts