Page 1 of 2 1 2 LastLast
Results 1 to 10 of 15

Thread: New Prop

  1. #1
    raiderteen's Avatar
    Join Date
    Nov 2007
    Location
    Marion, Illinois
    Posts
    320
    +1
    5

    New Prop

    Ok well i got my prop and am awaiting my driveshaft holder and prop removal tools. I got a ? about some things first off does the thing after the prop housing with the fins come off the housing


  2. #2
    old school big raider's Avatar
    Join Date
    Sep 2006
    Location
    dallas,tx
    Posts
    1,423
    Quote Originally Posted by raiderteen View Post
    Ok well i got my prop and am awaiting my driveshaft holder and prop removal tools. I got a ? about some things first off does the thing after the prop housing with the fins come off the housing
    thats the pump stator and it is connected to the driveshaft it stays there-the impeller housing or wear ring needs to be removed from prop by flathead screwdriver to pry tabs and the wear ring will slide off the driveshaft-not sure if that answered your question

  3. #3
    raiderteen's Avatar
    Join Date
    Nov 2007
    Location
    Marion, Illinois
    Posts
    320
    +1
    5
    it did to a degree. but i have already tried that and it didnt come apart

  4. #4
    old school big raider's Avatar
    Join Date
    Sep 2006
    Location
    dallas,tx
    Posts
    1,423
    Quote Originally Posted by raiderteen View Post
    it did to a degree. but i have already tried that and it didnt come apart
    then stand it on the end of the driveshaft and tap it LIGHTLY with a hammer-it will come off

  5. #5
    raiderteen's Avatar
    Join Date
    Nov 2007
    Location
    Marion, Illinois
    Posts
    320
    +1
    5
    so put the part that goes to the pto couplers on the ground with the whole prop thing in the air and then tap at the tabs with a flat head screw driver and a rubber mallot?

  6. #6
    old school big raider's Avatar
    Join Date
    Sep 2006
    Location
    dallas,tx
    Posts
    1,423
    Quote Originally Posted by raiderteen View Post
    so put the part that goes to the pto couplers on the ground with the whole prop thing in the air and then tap at the tabs with a flat head screw driver and a rubber mallot?
    no tap the support wings that bolt to the roof with a hammer

  7. #7
    raiderteen's Avatar
    Join Date
    Nov 2007
    Location
    Marion, Illinois
    Posts
    320
    +1
    5
    ok im gonna take a pic when i get home from work

  8. #8
    raiderteen's Avatar
    Join Date
    Nov 2007
    Location
    Marion, Illinois
    Posts
    320
    +1
    5
    ok got some pics
    Click image for larger version. 

Name:	misc 008.JPG 
Views:	30 
Size:	935.3 KB 
ID:	85486

    Click image for larger version. 

Name:	misc 009.JPG 
Views:	32 
Size:	949.3 KB 
ID:	85487
    of course gotta show off the new prop

    Click image for larger version. 

Name:	misc 010.JPG 
Views:	28 
Size:	760.2 KB 
ID:	85488
    now big raider wat was that wing you were talking about

  9. #9
    old school big raider's Avatar
    Join Date
    Sep 2006
    Location
    dallas,tx
    Posts
    1,423
    Quote Originally Posted by raiderteen View Post
    ok got some pics
    Click image for larger version. 

Name:	misc 008.JPG 
Views:	30 
Size:	935.3 KB 
ID:	85486

    Click image for larger version. 

Name:	misc 009.JPG 
Views:	32 
Size:	949.3 KB 
ID:	85487
    of course gotta show off the new prop

    Click image for larger version. 

Name:	misc 010.JPG 
Views:	28 
Size:	760.2 KB 
ID:	85488
    now big raider wat was that wing you were talking about
    2nd pic the bracket where the bolts go through on the impeller wear ring stand it up on driveshaft end and tap down with hammer on each side of the brackets it will fall off and slide down over and off the driveshaft end

  10. #10
    raiderteen's Avatar
    Join Date
    Nov 2007
    Location
    Marion, Illinois
    Posts
    320
    +1
    5
    k i will try that here in a bit

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Repitched prop vs. Brand new prop
    By Kinchyle in forum 4-Tec Performance
    Replies: 1
    Last Post: 07-04-2006, 08:03 PM
  2. Can anyone help me with my impeller shaft and new prop?
    By ccassone in forum 2-Stroke Performance
    Replies: 0
    Last Post: 02-10-2006, 03:45 PM
  3. New prop?
    By tgstk in forum 4-Tec Performance
    Replies: 20
    Last Post: 09-11-2005, 05:51 PM
  4. RXT and my new prop
    By Kinchyle in forum 4-Tec Performance
    Replies: 5
    Last Post: 08-27-2005, 09:06 PM
  5. Ran with new prop pitch, great results.
    By 1 FAST VE in forum 4-Tec Performance
    Replies: 3
    Last Post: 08-16-2005, 12:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •