Results 1 to 7 of 7
  1. #1

    Join Date
    Jul 2008
    Location
    cleveland
    Posts
    11

    Flywheel damage from broken crankshaft

    2003 gp1300-b
    Idea's on the damaged flywheel is it repairable or do I replace oem or aftermarket?
    Anyone selling one or point me in the right direction..
    Also looking at the mounts for the exhaust it looks like the engine was vibrating alot the top mounts are now oval and one stud was broken in the exhaust. Could it of been a flywheel or just normal vibration?
    Anyone have the 2 top mounting brackets?
    Last edited by tat2biz; 07-29-2008 at 03:59 PM.


  2. #2
    My son (mohawk man) jeffsntx's Avatar
    Join Date
    Sep 2006
    Location
    Belton TX
    Posts
    2,598
    +1
    1
    What year model ski are you working on?

  3. #3
    JKR1300's Avatar
    Join Date
    Jan 2006
    Location
    St Louis & 6mm LotO
    Posts
    497
    +1
    6
    That flywheel needs replacement. Replace with OEM if you have a 1300. Check stator also - it probably needs R & R.
    Same thing happened to me when my crank snout broke. It gets expensive

  4. #4
    My son (mohawk man) jeffsntx's Avatar
    Join Date
    Sep 2006
    Location
    Belton TX
    Posts
    2,598
    +1
    1
    If its an EFI 1300, I have a flywheel and a stator with the cover that only has 12 hours on it. If its a carbed boat, I THINK I have a stator with a cover, but I dont have a good flywheel.

  5. #5

    Join Date
    Jul 2008
    Location
    cleveland
    Posts
    11




    Last edited by tat2biz; 07-30-2008 at 12:37 AM.

  6. #6
    My son (mohawk man) jeffsntx's Avatar
    Join Date
    Sep 2006
    Location
    Belton TX
    Posts
    2,598
    +1
    1
    What year model is this ski?

  7. #7

    Join Date
    Jul 2008
    Location
    cleveland
    Posts
    11

    2003 gp1300 b

    The Ski is a 2003 gp1300 b has the EFI

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Polaris VirageI EMM/Stator-Flywheel damage
    By Ron Morris in forum Polaris Open Discussion
    Replies: 6
    Last Post: 09-27-2009, 09:58 AM
  2. Check out damage from a dropped valve!
    By bryanw80 in forum 4-Tec Performance
    Replies: 2
    Last Post: 09-13-2009, 09:55 PM
  3. hull damage from pump shoe
    By banshee350racer in forum Yamaha How To & FAQs
    Replies: 9
    Last Post: 08-22-2009, 02:06 PM
  4. GP Front end damage from Dock
    By xsockguyx in forum Yamaha How To & FAQs
    Replies: 12
    Last Post: 04-22-2009, 11:07 PM
  5. Flywheel damage from broken crankshaft
    By tat2biz in forum Yamaha How To & FAQs
    Replies: 6
    Last Post: 07-29-2008, 05:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •