Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 27
  1. #1
    mrbtd's Avatar
    Join Date
    Jul 2005
    Location
    Lindenhurst, Illinois, United States
    Posts
    4,309
    +1
    2

    FS Ported 1300 Top End - $950 - Not sold yet

    I just got back the cylinders from Millennium. Two of the three were renicked and the third simply didn't need to be done. One piston is brand new and the other two have 10 hours on them. I sent everything to Millennium to have them go through to make sure all is good.

    I either had a rod bearing fail or me cruising @ 5K RPM's for 5-7 minutes took the top end out originally.

    As far as power goes -I can tell you I was spinning a true 14/20 DF @ 7350 (73.8 mph) on the stock ignition. That was in 90 degree temps @ MB. I dont think there is any question it could turn a 14/23 or 14/24 with authority.

    Tim Z of Z-Force Racing did the porting. I brought him cylinders to match up and he added some of his own touches.

    To sum it up
    66V Cylinders ported and bored to 84mm
    Two 66v cylinders brand new renick (Millennium did the work)
    One 10 hour cylinder (perfect shape)
    1 new piston (previous one had deto all over the top)
    2 10 hour pistons

    @950 I will cover shipping and insurance in the US. I have no problem shipping overseas but buyer is responsible for shipping.

    For those that dont know. A ported top end is around $2K if you send core cylinders in for boring/plating and buy pistons.
    Last edited by mrbtd; 08-01-2008 at 08:52 AM.


  2. #2
    Duke's Avatar
    Join Date
    Jul 2006
    Location
    Florida
    Posts
    10,004
    +1
    406
    Thats a steal for a fresh topend!!!!!

  3. #3
    Moderator OsideBill's Avatar
    Join Date
    Mar 2006
    Location
    United States
    Posts
    11,875
    +1
    30
    Great deal this guy is looking for one. http://www.greenhulk.net/forums/showthread.php?t=67662

  4. #4
    Never say never KirkF350's Avatar
    Join Date
    Jun 2005
    Location
    Midlothian, Texas
    Posts
    4,433
    +1
    3
    Wow. Why are all the good deals out there when I am broke? You wanna trade a looooow hour 1300 non-pv, non ported topend?

  5. #5
    Who poerted them originally? How does Millennium compare to Lowell or TJ's work? The total time on the parts since being ported is 10hrs? Do you have any pics?

    Thanks

    km

  6. #6
    mrbtd's Avatar
    Join Date
    Jul 2005
    Location
    Lindenhurst, Illinois, United States
    Posts
    4,309
    +1
    2
    They dont get ported twice (Millenium did the Renick). I sent you a PM

  7. #7
    mrbtd's Avatar
    Join Date
    Jul 2005
    Location
    Lindenhurst, Illinois, United States
    Posts
    4,309
    +1
    2
    Quote Originally Posted by KirkF350 View Post
    Wow. Why are all the good deals out there when I am broke? You wanna trade a looooow hour 1300 non-pv, non ported topend?
    Sure if it would fit my GPRXP .

  8. #8
    Never say never KirkF350's Avatar
    Join Date
    Jun 2005
    Location
    Midlothian, Texas
    Posts
    4,433
    +1
    3
    Quote Originally Posted by mrbtd View Post
    Sure if it would fit my GPRXP .

  9. #9
    dhoad's Avatar
    Join Date
    Aug 2005
    Location
    North Aurora, Illinois, United States
    Posts
    3,182
    +1
    6
    I rode the gpr with this ported topend at MB. It pulled hard bottom thru top!
    mrbtd is meticulous with his skis and parts, someone is getting a bargain
    Last edited by dhoad; 07-30-2008 at 10:33 AM.

  10. #10
    just curious what for jetting you would run with this setup

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB I need a 1300 top end preferably ported
    By alex29573 in forum Yamaha Classifieds
    Replies: 6
    Last Post: 04-21-2012, 12:06 PM
  2. FS FS: Ported 1300 Top End (Lowell Horning)
    By Full Throttle in forum Yamaha Classifieds
    Replies: 1
    Last Post: 01-04-2011, 03:18 AM
  3. FS TJ Ported 1300 top end
    By WFO in forum Yamaha Classifieds
    Replies: 1
    Last Post: 07-08-2010, 09:31 PM
  4. WTB 1300 top end, OEM or ported
    By 00gprNC in forum Yamaha Classifieds
    Replies: 12
    Last Post: 11-01-2009, 06:44 AM
  5. FS/Ported 1300 Top End,crank,cases(Pics)
    By james k in forum Yamaha Classifieds
    Replies: 28
    Last Post: 11-18-2008, 11:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •