Page 1 of 2 1 2 LastLast
Results 1 to 10 of 17
  1. #1
    dhoad's Avatar
    Join Date
    Aug 2005
    Location
    North Aurora, Illinois, United States
    Posts
    3,182
    +1
    6

    FS lowell ported 84mm 66e twin topend

    I am in the process of disasembling my Lowell topend on my xlt 800 BB and it is for sale. I know this is a desirable topend for the standup guys and will work well for a nice hp bump on any 66e platform like gp800r or xlt800.
    I will check the hours but I believe there was 20 hours put on topend since new.
    66e cyls were bored to 84mm, ported to lowells specs and reniked, with prox pistons. 2 pv were cut to match
    head was cut to match the bore and compression just measured the other day at 162lbs on both cylinders.
    a head gasket was cut to match and the current head gasket has 1 hour run time.
    I will send pics to those that are interested, I am leaving town till August 2nd and won't have pics till then.
    I will post a price soon but I can't find my original receipt.
    This topend makes great power and my xlt800 would run with a stock xlt1200
    my guess is the hp went from 120 stock to 140+
    I have 2 props for the the topend also. More info soon on price etc.
    Pm me with any questions


  2. #2
    dhoad's Avatar
    Join Date
    Aug 2005
    Location
    North Aurora, Illinois, United States
    Posts
    3,182
    +1
    6
    ttt

  3. #3

    Join Date
    Oct 2006
    Location
    Plymouth, MA, USA
    Posts
    134
    +1
    1
    I would like picture and price please?

    Also looking for the following, 66E flywheel cover, 66e crank.

    Thanks

    pat

    [email protected]

  4. #4
    dhoad's Avatar
    Join Date
    Aug 2005
    Location
    North Aurora, Illinois, United States
    Posts
    3,182
    +1
    6
    sorry for the delay, pics on tuesday
    Last edited by dhoad; 08-10-2008 at 05:30 PM. Reason: d'oh

  5. #5
    dhoad's Avatar
    Join Date
    Aug 2005
    Location
    North Aurora, Illinois, United States
    Posts
    3,182
    +1
    6
    here are some pics
    price $850 shipped
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	portedBB 004.jpg 
Views:	64 
Size:	1.85 MB 
ID:	88485   Click image for larger version. 

Name:	portedBB 013.jpg 
Views:	72 
Size:	1.85 MB 
ID:	88486   Click image for larger version. 

Name:	portedBB 008.jpg 
Views:	70 
Size:	1.72 MB 
ID:	88487  

  6. #6
    dhoad's Avatar
    Join Date
    Aug 2005
    Location
    North Aurora, Illinois, United States
    Posts
    3,182
    +1
    6
    here is a response from Lowell Horning, the portsmith who did the work on motor.
    "The exh. is opened for 1300. All transfer ports are set at same height. Boost port is raised. Transfer base is raised. All air transfer surfaces are smoothed / sanded. All ports were chamfered Before plating was done."

    call me 630-643-1101 or pm me

    thanks
    Doug Hoad

  7. #7
    dhoad's Avatar
    Join Date
    Aug 2005
    Location
    North Aurora, Illinois, United States
    Posts
    3,182
    +1
    6
    ttt

  8. #8
    dhoad's Avatar
    Join Date
    Aug 2005
    Location
    North Aurora, Illinois, United States
    Posts
    3,182
    +1
    6
    topend is relisted, buyer has not come up with funds and is now non responsive.
    Make an offer I need to get the topend SOLD. I will throw in the req'd carb parts, jetting and N/S combo, to set it straight.


    Also, looking to trade Island racing modded 66e carbs for a stock carb rack.
    My carbs have choke plates and accel pump removed, fitting in place for primer and will supply primer pump.

  9. #9
    dhoad's Avatar
    Join Date
    Aug 2005
    Location
    North Aurora, Illinois, United States
    Posts
    3,182
    +1
    6

    LOWELL bored and ported 66e topend - FOR SALE

    pm me for details and more pics if needed

  10. #10
    doug I have stock carbs with the same mods, if your looking for a set to go back to stock my will work just add the primer to the ski. Not hard to do and probably easier to sell, better for the ski!
    Scott

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS: Lowell Horning Ported 2002 GPR Big Bore 1300 Waverunner
    By '02GPRider in forum Yamaha 2 Stroke Skis
    Replies: 39
    Last Post: 04-27-2009, 03:26 PM
  2. Another Lowell Ported 1400 Coming Soon
    By Bryan K in forum Yamaha PWC Performance (2-stroke)
    Replies: 15
    Last Post: 12-11-2007, 09:26 PM
  3. ??? about the lowell porting and EFI
    By spyder3000gtvr4 in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 06-04-2007, 11:01 PM
  4. Jetting for Lowells porting?
    By John in forum Yamaha PWC Performance (2-stroke)
    Replies: 132
    Last Post: 08-13-2006, 09:23 PM
  5. Lowell porting-what carb jetting???
    By VOODOO in forum Yamaha PWC Performance (2-stroke)
    Replies: 11
    Last Post: 07-26-2006, 05:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •