07-31-2008, 06:42 PM #1
Heads up on valve train kit install
I just wanted to put this out there for anyone who has or plans on purchasing a used valve train kit since I've seen a bunch of them floating around on the forum. Make sure you purchase the necessary new rocker shaft bolts. For those of you who aren't familiar with the setup, there's 6 of them and they are torqued to stretch just like the head bolts. Neither the rocker bolts nor the head bolts should be re-used.
07-31-2008, 06:55 PM #2
thats a big 10-4.... thanks james
07-31-2008, 06:57 PM #3
- Join Date
- Jul 2005
- euxton nr chorley lancashire, england
07-31-2008, 07:03 PM #4
07-31-2008, 07:03 PM #5
I know..it's possible..but not recommended. I think Riva is hinting that it's a good idea to replace them considering they include new bolts in their upgrade kit.
07-31-2008, 07:04 PM #6
07-31-2008, 09:58 PM #7
JUST GO HERE AND GET THE NEW ONES.........
08-01-2008, 11:38 AM #8
once they are stretched they dont bounce back.
If you can get ARP brand, get those. If not, get the ones from Diggs link.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Enufpwr in forum 4-Tec PerformanceReplies: 2Last Post: 05-11-2010, 12:17 PM
By Green Hulk in forum Yamaha PWC Performance (4-stroke)Replies: 49Last Post: 03-05-2010, 09:50 PM
By mxl16 in forum Sea Doo ClassifiedsReplies: 0Last Post: 05-27-2008, 06:26 AM
By breon in forum 4-Tec PerformanceReplies: 27Last Post: 11-03-2007, 08:13 PM
By Fatty in forum 4-Tec PerformanceReplies: 2Last Post: 07-11-2007, 10:12 AM