Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
  1. #1

    Join Date
    Jun 2008
    Location
    south carolina
    Posts
    33

    f/s stock gp1200r cylinders with gas valves

    i've got a complete set of 1200r cylinders with gas valves. pulled the cylinders at 44hrs to do a lowell 1300. no scarring or nicks. pictures in following link $750.00 + s/h thanks http://good-times.webshots.com/album...ost=good-times
    Last edited by clkwrkorg36; 08-01-2008 at 07:14 AM.


  2. #2
    Where are these loacted? also the link doesn't seem to work. Whay cyls do you have on the engine now? I may be intretsed. Try to get the picture link fixed.
    Last edited by Full Throttle; 08-01-2008 at 12:35 AM.

  3. #3

    Join Date
    Jun 2008
    Location
    south carolina
    Posts
    33
    link should work now, and the cylinders are on the last page. thanks

  4. #4
    PM sent for the PV's.
    Last edited by Full Throttle; 08-02-2008 at 01:00 AM.

  5. #5

    Join Date
    Jun 2008
    Location
    south carolina
    Posts
    33
    right now i'm running 1200 cylinders bored to 1300 and ported by lowell.

  6. #6

    Join Date
    Jun 2008
    Location
    south carolina
    Posts
    33
    gas valves are sold, i'll take $550.00 for the three cylinders. thanks

  7. #7
    HopatcongGPR's Avatar
    Join Date
    Feb 2006
    Location
    New Jersey
    Posts
    1,114
    i assume the gas valve plugs are the press in type and not the threaded type so they can be converted back to normal PV with velative ease?

  8. #8

    Join Date
    Jun 2008
    Location
    south carolina
    Posts
    33
    i'll check, don't remember off the top of my head. believe they were pressed in though.

  9. #9

    Join Date
    Jun 2008
    Location
    south carolina
    Posts
    33
    they are tapped for the threaded inserts. don't remember doing it, but obviously i did.

  10. #10

    Join Date
    Jun 2008
    Location
    south carolina
    Posts
    33
    i've also got the bottom half of a stock 1200r head i need to get rid of $65 plus s/h. it's probably got 10-15hrs on it with no pitting.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. SOLD gp1200r or xlt cylinder with power valve
    By thatdude596 in forum Yamaha Classifieds
    Replies: 9
    Last Post: 01-23-2013, 09:37 PM
  2. FS GP800R GP1200R Big Bore setup with gas valves
    By philip_gpr in forum Yamaha Classifieds
    Replies: 7
    Last Post: 07-21-2010, 08:54 PM
  3. Need help with Gas Valves.
    By Yellow93 in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 03-27-2010, 09:47 PM
  4. FS GP 1300 R cylinder with gas valves
    By attila in forum Yamaha Classifieds
    Replies: 2
    Last Post: 02-16-2009, 12:22 AM
  5. Need some help with gas valves
    By Robsauto2 in forum Yamaha PWC Performance (2-stroke)
    Replies: 21
    Last Post: 08-13-2007, 11:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •