Results 1 to 9 of 9
  1. #1

    Will This Work??? Jetworks Holeshot Kit On Gp800r 2001.

    Will This Work??? Jetworks Holeshot Kit On Gp800r 2001.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	JETWORK HOLESHOT ON GP800R 2001.gif 
Views:	502 
Size:	7.8 KB 
ID:	86230  


  2. #2
    Moderator beerdart's Avatar
    Join Date
    Aug 2006
    Location
    CT
    Posts
    25,929
    +1
    1,407
    You will need to block the water where the gasket is.

  3. #3
    Moderator OsideBill's Avatar
    Join Date
    Mar 2006
    Location
    United States
    Posts
    11,875
    +1
    30
    I am not familiar with the 800 platform did they have a temp sensor in the exhaust like the 1200r does?

  4. #4
    The Rubber Gasket I Was Just Going To Make My Self ,out Of An Old Exhuast Tube .that Should Work Do You Think???

    -------------------------------------------------------------------------

    Yep There Is A Temp Sensor In Stinger, Sensor Is Deffinent To The One On 1200 i think ,the Sensor Hole Is 7/16 And There Is No Way to Relocate It, So I Was Thinking Just below the temp sensor Drilling And Tap A Hole for water bypass . What Do You Think????
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	02082008137.jpg 
Views:	227 
Size:	485.1 KB 
ID:	86394  

  5. #5
    "Hustler" Inkaddict's Avatar
    Join Date
    Aug 2007
    Location
    NJ
    Posts
    4,712
    +1
    26
    Quote Originally Posted by COUJAR View Post
    The Rubber Gasket I Was Just Going To Make My Self ,out Of An Old Exhuast Tube .that Should Work Do You Think???

    -------------------------------------------------------------------------

    Yep There Is A Temp Sensor In Stinger, Sensor Is Deffinent To The One On 1200 i think ,the Sensor Hole Is 7/16 And There Is No Way to Relocate It, So I Was Thinking Just below the temp sensor Drilling And Tap A Hole for water bypass . What Do You Think????
    Home depot sells 8x8 sheets of rubber gasket material for 5 bux in the plumbing section... Its orange... I just took one out after 2 years and it was still 100% together 100 hours later... literally...

  6. #6
    Greenhulk Grasshopah (DRC) HallPass's Avatar
    Join Date
    Jun 2007
    Location
    Kansas
    Posts
    5,587
    +1
    2
    My rubber gasket.. sucked.. it just leaked!!!

    I bought a Jetworks gasket from WFO works like a charm!

    as far as I know/remember it has stopped leaking!!!

    I would just get one from him..

  7. #7

    Question

    thank you all for feedback . So should give mod a go on the 800????
    All im after is a bit better holeshot ,the 800's are treble for holeshot!

  8. #8
    Jet works had made an adapter kit for the 800 engines. I am lucky enough to have one waiting to be installed. From what I remember he still had a couple left of his shelf. Its not as easy as making your own gasket and drilling a new whole like the 12/1300's. Call jet works and have him sell you the right stuff. From what I remember the jetworks will be more noticeable with the 800's than the bigger engines!

  9. #9
    NIXON'S BACK!! cincygpr's Avatar
    Join Date
    Jul 2007
    Location
    Birmingham, MI
    Posts
    545
    If you can find some thin (.020-.040") sheet aluminum, you could probably cut it and drill it in the same shape as the rubber blockoff gasket for additional reinforcement. When I installed the jetworks kit on my GP12R this weekend, I put the rubber gasket first (closest to the stinger pipe), then the stock gasket, then the aluminum gasket last (closest to the waterbox). Hopefully it holds

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. rotax racing ECU 07+ on a 08 rxpx engine. will this work
    By Steve-m31164 in forum Sea Doo How To & FAQs
    Replies: 1
    Last Post: 05-31-2013, 04:42 PM
  2. Will this work on my PRO 1200
    By retro in forum Polaris Open Discussion
    Replies: 6
    Last Post: 01-21-2010, 04:08 AM
  3. will this work on my ski???!!!!!! bid ends soon
    By ugadawg131 in forum Polaris Open Discussion
    Replies: 3
    Last Post: 01-21-2007, 10:37 AM
  4. yo will this work...need one bad
    By mudd in forum Polaris Open Discussion
    Replies: 7
    Last Post: 12-06-2006, 09:47 AM
  5. Will this work? Sound Mat
    By mrbtd in forum Yamaha PWC Performance (2-stroke)
    Replies: 12
    Last Post: 09-27-2006, 12:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •