Thread: gp12 carb plate..
08-03-2008, 04:28 PM #1
gp12 carb plate..
i just got my riva flame arrestors and adapters i was just wondering how every one instaled theirs? did you guys use the carb plate with the greese fittings between like the oem set up or re-route them also did anyone use any type of gaskets?? thanks mike..
08-03-2008, 07:05 PM #2
I tossed the plate on mine, I had already gone premix so I did not need the bracket up front for the grease fitting and I just zip tied the rear grease fitting to a hose. No gaskets needed just make sure the surfaces are clean and flat. use a little blue loctite on the adapter screws.
08-03-2008, 08:11 PM #3
- Join Date
- Aug 2006
I cut the grease fitting area free of the plate and reuse that small portion to reattach the grease fittings and use the rest for a bilge pump mount or whatever
08-03-2008, 09:48 PM #4
I did what ZMANN did, left enough of the bracket for the zirk fittings.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Draven99150 in forum Kawasaki PWC Performance (2-stroke)Replies: 4Last Post: 06-05-2010, 03:18 PM
By smitch in forum Yamaha ClassifiedsReplies: 18Last Post: 02-26-2010, 07:17 AM
By lockone in forum Yamaha PWC Performance (2-stroke)Replies: 9Last Post: 07-09-2009, 09:54 PM
By philip_gpr in forum Yamaha ClassifiedsReplies: 1Last Post: 04-19-2009, 10:39 AM
By stepjl in forum Yamaha PWC Performance (2-stroke)Replies: 2Last Post: 09-13-2007, 06:47 AM