Thread: riva bilge pump bracket pattern
09-18-2005, 02:07 PM #1
riva bilge pump bracket pattern
i have the pattern for making a gpr rule bilge pump bracket if anyone is interested in fabricating their own.
09-18-2005, 04:14 PM #2
- Join Date
- Aug 2005
I'd be interested in one!
09-18-2005, 04:42 PM #3
JAY, JUST GO TO THE IMAGE ABOVE AND CLICK ON ( SAVE THIS IMAGE) THEN GO TO MY PICTURES ON YOUR COMPUTER AND RESIZE AND PRINT IT OUT. IF THAT DOESNT WORK FOR YOU, I'LL EMAIL IT TO U
10-01-2005, 09:45 AM #4
GP-1200R bilge pump brackets
I have some new GP-1200R bilge pump brackets that I think are the same as the 1300R. If anybody is interested, I will sell them for $10.00 each.
Contact me directly please, at email@example.com
05-29-2006, 10:48 PM #5
The template works great, and didn't cost $25. I just used an old street sign I had laying around.
02-16-2007, 11:41 PM #6
Canadian, what did you use to cut it with ?
Randy, do you have any more left for 10.00 ?
Brian, how thick of steel/aluminum do you use ?
02-16-2007, 11:54 PM #7
Randy, I just sent you an email.
Last edited by VOODOO; 02-17-2007 at 12:03 AM.
02-17-2007, 12:52 AM #8
RX951, I used a Jigsaw and cleaned it up with a file. Just used an old street sign I had laying around.
02-17-2007, 12:56 AM #9
02-17-2007, 08:00 AM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Johnny5 in forum Yamaha ClassifiedsReplies: 4Last Post: 08-03-2010, 02:43 PM
By gtxscrider in forum Yamaha ClassifiedsReplies: 7Last Post: 04-05-2010, 11:02 PM
By WFO in forum Yamaha ClassifiedsReplies: 3Last Post: 10-23-2009, 08:08 PM
By jprochnow in forum Yamaha Open DiscussionReplies: 4Last Post: 11-18-2008, 01:15 AM
By sic fish in forum Yamaha How To & FAQsReplies: 2Last Post: 06-18-2007, 02:54 PM