Results 1 to 5 of 5
  1. #1

    How to swap a GPR head?

    I searched the forums and couldn't find any how tos on this. If anyone knows of any write ups, on this how to that would be great.

    This is a pretty basic question and job I assume, but wanted to confirm before I went ahead with the swap. I'm basically swapping a stock 2004 1300GPR head for another stock one (the exhaust mounts cracked). Is there anything I should be aware about other than proper tightening on the bolts? Thanks!
    Last edited by 04GPR; 08-09-2008 at 08:11 PM.


  2. #2
    NIXON'S BACK!! cincygpr's Avatar
    Join Date
    Jul 2007
    Location
    Birmingham, MI
    Posts
    545
    http://www.hydrotoys.com/gpr/tuners/...ce/GP1300R.pdf

    Should give you everything you need!

    Looks like most bolts get torqued to 25 lb-ft in a progressive torque pattern (first to 16 lb-ft, then to 16 lb-ft again, then to 25 lb-ft).

  3. #3
    Moderator OsideBill's Avatar
    Join Date
    Mar 2006
    Location
    United States
    Posts
    11,875
    +1
    30
    Yep pretty simple make sure everything is clean and torqued to spec.

  4. #4
    Thanks, Oh ya, forgot to ask, do I need to put gasket sealer / silicone stuff between the gasket and head? and if so, on what side?

  5. #5
    Moderator OsideBill's Avatar
    Join Date
    Mar 2006
    Location
    United States
    Posts
    11,875
    +1
    30
    No use waterproof grease very light coat

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How to swap to Dual Impeller on a Sea-Doo (on a RXPX 260)
    By Jackmcd in forum Videos & Pictures
    Replies: 1
    Last Post: 09-02-2015, 10:39 AM
  2. Replies: 0
    Last Post: 07-12-2015, 03:09 PM
  3. How to swap to Dual Impeller on a Sea-Doo (on a RXPX 260)
    By Jackmcd in forum Sea Doo How To & FAQs
    Replies: 0
    Last Post: 07-12-2015, 03:07 PM
  4. How much to take off GPR Head to get 150psi??
    By SJ-(KY) in forum Yamaha PWC Performance (2-stroke)
    Replies: 4
    Last Post: 06-29-2015, 01:53 PM
  5. How to swap props on a zieman trailer
    By ou812 in forum 4-Tec Performance
    Replies: 9
    Last Post: 03-23-2007, 11:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •