Results 1 to 4 of 4
  1. #1

    Torque settings for Cam Install

    Does anyone know torque settings and is there any special order the rocker shaft bolts need to be tightened in?

    Same for rocker cover and cam sprocket bolts?

    Any special tricks I need to know?

    thanks


  2. #2
    BLACK MAGIC HEADERS hydrojunkie's Avatar
    Join Date
    Jun 2007
    Location
    new york
    Posts
    3,529
    +1
    3
    Quote Originally Posted by 74mjh View Post
    Does anyone know torque settings and is there any special order the rocker shaft bolts need to be tightened in?
    FORGOT THE TORQUE SPEC BUT TORQUE FROM INSIDE OUT.

    Same for rocker cover and cam sprocket bolts?
    USE RED LOCTITE ON THE CAM SOCKET HEAD SRCREWS

    Any special tricks I need to know?
    YES LOCK THE CRANK AND CAM

    thanks
    HOPE THIS HELPS

  3. #3
    DaveC's Avatar
    Join Date
    Jun 2007
    Location
    Central Oklahoma
    Posts
    2,362
    +1
    41
    Rocker shaft bolts 7ft lb(10 NM) then 14 ft lb(20NM) + 90* turn each bolt. BRP says not to reuse the stretch bolts.
    Cam sprocket bolts 7ft lb.(10NM)
    Rocker cover bolts 7ft lb. (10NM)

    The torque order can be found here.
    http://www.rivamotorsports.com/instr...s19050_vtu.pdf

  4. #4
    Thanks for your help guys

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Quick, need Torque setting for trailer axle
    By Morphd in forum Sea Doo How To & FAQs
    Replies: 2
    Last Post: 07-29-2013, 05:19 AM
  2. Torque Setting for fzr cylinder head?
    By Ntracing in forum Yamaha PWC Performance (4-stroke)
    Replies: 4
    Last Post: 02-07-2012, 04:05 PM
  3. What are the torque settings for the impeller housing bolts?
    By Noob in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 09-05-2009, 01:35 PM
  4. Torque settings for motor mounts?
    By MPower in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 06-25-2007, 09:00 AM
  5. Torque setting for oil pressure relief valve plug???
    By CRS in forum 4-Tec Performance
    Replies: 4
    Last Post: 08-27-2005, 10:50 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •