Results 1 to 4 of 4
  1. #1
    allairch's Avatar
    Join Date
    Apr 2007
    Location
    calif
    Posts
    131

    Question rxp rear hull seal came out

    went for a 4 day trip scond day there went around a bouy hammerd throttle and would not go major cavation .Lucky i was in wont of our camp pulled it would hardly move engine still sounds great riva stage 3 with rude really first time to really ride. Its jd1 ski he sold last fall the stage one with a rude on it . Any ways rode it to shore pulled seat it was pouring water in around the rear hull seal looks like the whole seal came out of the hull is this common .Does the motor have to come out to get the shaft out because i cant get the shaft to slide out ?suggestions


  2. #2
    allairch's Avatar
    Join Date
    Apr 2007
    Location
    calif
    Posts
    131

    rear carbon ring failing

    got the pump shaft out it looks like the c-clip on the shaft came off and let the support ring walk backwards on the shaft is that possible. The thru hull piece is worn pretty badly. Dont see how the shaft could of hit it
    and chewed it up.There is a bearing at the pto end of the shaft. That doesnt fit in the case but just had the half boot and hose clamp on it floating on the end dont see it on the micro fisch either ?

  3. #3
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    Quote Originally Posted by allairch View Post
    got the pump shaft out it looks like the c-clip on the shaft came off and let the support ring walk backwards on the shaft is that possible. The thru hull piece is worn pretty badly. Dont see how the shaft could of hit it
    and chewed it up.There is a bearing at the pto end of the shaft. That doesnt fit in the case but just had the half boot and hose clamp on it floating on the end dont see it on the micro fisch either ?

    Yes the C-Clip coming off letting ths hat walk back is definatly possible..
    The floating bearing does not fit into the case..it fits in that rubber boot you are talking about...Look at number 42-43 on the link below..You will see the rubber boot you are talking about..the bearing sits inside like you had noticed..

    http://partsfinder.onlinemicrofiche....=13&A=129&B=11

  4. #4

    Smile

    It sounds like just the c clip came off and drive shaft seal just moved forward ,perhaps it was a modified type seal assembly and someone tried to stabilize the Drive shaft by using a bearing like old style doo thru hull fittings,hey post some pictures and it'll be much easier to help you>Marvin is this the part that came loose??
    http://partsfinder.onlinemicrofiche....=13&A=129&B=12

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS - Parts FS: 05 black/ green RXP hull or part out
    By Boosted3s in forum Sea Doo Classifieds
    Replies: 3
    Last Post: 07-29-2012, 06:55 PM
  2. FS 05 RXP hull or part out
    By SeadooTech in forum Sea Doo Classifieds
    Replies: 1
    Last Post: 08-24-2011, 01:43 PM
  3. Rear seal pushed out of case on 1300. Whats the cause?
    By dragstang86 in forum Yamaha PWC Performance (2-stroke)
    Replies: 10
    Last Post: 06-23-2011, 05:08 PM
  4. Rxp rear air keeping water out
    By skigolfnut in forum 4-Tec Performance
    Replies: 19
    Last Post: 05-09-2011, 10:15 PM
  5. rear seals blowing out xl1200lmtd
    By xl1200lmtd in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 06-01-2009, 05:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •