Results 1 to 6 of 6
  1. #1
    Chicago RXP'er Jaronk56's Avatar
    Join Date
    Aug 2008
    Location
    Chicago
    Posts
    465

    Newbe Needs Help RXP

    Hi guys im new to the forum..

    I just aquired an RXP from an insurance buy back.....

    The hull need to be replaced, so im going to start looking for a new used one....

    Now a few questions.

    is the 07 RXP compatable with any other years.... since i have to replace the haul... do i have to find another 07?

    Any tips with changing of a hull would be greatly apprciated!

    Jaron


  2. #2
    King_Of_Fun's Avatar
    Join Date
    Jul 2007
    Location
    Catawba Island, Ohio
    Posts
    2,703
    Hey Jaronk56, welcome to the forum. I can tell you that RXP electronics from 2004 - 2005 and 2006 - 2007 are interchangeable. I haven't read much ahout hulls though. My guess would be the main differences are going to be around the instrument cluster and wiring harness. I'm sure the pump, vts and engine mounting are the same. I'm sure others will chime in shortly... Ron

  3. #3
    Chicago RXP'er Jaronk56's Avatar
    Join Date
    Aug 2008
    Location
    Chicago
    Posts
    465
    Thanks Ron!

    So possibly i can interchange 06 & 07?


    Anymore tips and help APPRCIATED

    Jaron

  4. #4
    King_Of_Fun's Avatar
    Join Date
    Jul 2007
    Location
    Catawba Island, Ohio
    Posts
    2,703
    That's my best guess. You might want to see if Shibby1485 chimes in, or maybe PM him. He works at a dealer show he should know for sure... Ron

  5. #5
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,627
    +1
    806
    2004-2005 electronics work together. 2006 is unique. 2007 is even more different.

    What you need is just another hull and you will have to swap your guages and entire electronic system if it's not an 07. My guess is the hull would come bare anyway so it shouldn't be a problem. Even better is you wouldn't have any left over parts if you purchased a bare hull and did a 100% swap.

    You'll need to purchase or borrow an engine alignment tool. I recommend purchasing a shop manual as well.

  6. #6
    Chicago RXP'er Jaronk56's Avatar
    Join Date
    Aug 2008
    Location
    Chicago
    Posts
    465
    Just got a shop manual

    Thanks GUYS!

    ONE LAST question :P

    So the HULLS 04 - 07 are the same... so i can swap all my 07 stuff to an 04 -07 hull.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Newb Needs help please! 2000 SLX rev limit stuck on
    By Full Throttle Speed in forum Polaris Open Discussion
    Replies: 4
    Last Post: 07-03-2011, 09:32 AM
  2. Need help RXP running slow
    By enemozo in forum 4-Tec Performance
    Replies: 0
    Last Post: 08-15-2010, 10:04 PM
  3. Need help-RXP wants pull left
    By Zeus691 in forum Sea Doo Open Discussion
    Replies: 4
    Last Post: 05-19-2007, 04:36 PM
  4. Need Help, RXP problems, Plug pictures
    By Water4fire in forum 4-Tec Performance
    Replies: 32
    Last Post: 04-26-2007, 10:38 PM
  5. No Fuel to the carbs! Newb needs help!
    By sweetcoupe in forum Polaris Open Discussion
    Replies: 19
    Last Post: 01-30-2007, 01:26 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •