Results 1 to 10 of 10
  1. #1
    EZ Dock of Long Island Shibby1485's Avatar
    Join Date
    May 2005
    Location
    Long Island, NY
    Posts
    9,464
    +1
    4

    FS - Custom Turbocharged GPRXP w/ BRAND NEW EVERYTHING

    Totally Custom and redone top to bottom every single square centimeter of it... NOTHING was left untouched... new hardware, new parts, new everything.

    I still have the boxes to pretty much every single part on the ski.. and paperwork and instructions.

    here's the build thread to see the build every step of the way
    http://greenhulk.net/forums/showthread.php?t=44307


    It is currently needing ONE THING still.. the exhaust pipe. I'll sell it 99.9% complete like this, or i'll continue to finish which will take me a little while longer to gather the resources to get the job completed the way i want it. If there is any serious interest, please PM me and we can discuss it and go over my receipts and costs invested in the project. This has the potential to do huge things on the water with someone that has the time, patience, and know-how to tune and setup a high performance watercraft. Go through the mods and parts below and you'll be astounded at how extensive the list is, and every single part of it is brand new.


    ENGINE
    • BRAND NEW (zero hours,hasn't been run yet) 2007 Normally Aspirated 4-tec motor with the neccessary upgraded internals for Turbo setup
    • Has 3 brand new Forged RXP Pistons
    • Has a lightweight machined ring gear on the crank
    • 2008 RXP-X exhaust valves
    • Custom machined and welded PTO cover to block off the water pump shaft coming from the oil pump
    • PTO cover drilled and tapped for Turbo oil drain
    • Open Loop Cooling polished block off plate
    • Rotax Racing Lightweight Camshaft Gear
    • 4-tec Performance billet Block Guard
    HULL
    • Custom Painted 50th Anniversary Yamaha Schematic with custom Exotic Signs Graphics
    • One of a kind CUSTOM Dual Exhaust setup with billet Rude tips
    • Lightweight Racing Seat painted to match
    • Custom jettrim Seat cover color coordinated
    • Carbon Fiber Riva/Bullet Hood Assembly with custom molded gauge pods
    • UMI Racing Steering System all custom wired up with switch housings and billet throttle lever on TAG X5 bars with ODI Grips
    • Blueprinted Trued Hull
    • Carbon Fiber Pump Tunnel Reinforcement
    • all brand new 2005+ OEM pump shoe, trim tab, rideplate hull insert brackets
    • BLOWSION Billet gas cap
    • JIM'S FF Rideplate Setup
    • Leo's Holeshot kit all molded into the hull with fiberglass and painted in to match. Totally undetectable install, probably the best
    • Bilge Pump
    • all new Digital Ultra-lite Series Autometer Gauges custom molded into CF hood with pods for oil temp and water temp
    PUMP and Driveline
    • all BRAND NEW components ordered direct from Yamaha has never touched the water
    • New 05+ Pump setup with new bearings and seals
    • New Driveshaft
    • two NEW sets of nozzles (XLT and GPR)
    • powdercoated to match ski R&D Auto-drop Nozzle Kit
    • NEW GPRXP conversion driveshaft
    • All new motor mounts
    • ROTAX RACING Heavy Duty Front Mount
    • Pump Plug Seal kit
    • New 2" Extension kit
    TURBOCHARGER SYSTEM (waterjacketed AND heat treated coating)
    • Black Magic Headers heat coated
    • Black Magic Turbo Head pipe heat coated
    • Brand new Turbo from PTE with powdercoated to match yellow compressor housing and heat coated turbine housing
    • Turbosmart Electronic Boost control with the e-boost 2
    • Turbosmart Ultra-gate 38 external wastegate
    • Turbosmart Supersonic Blow off valve
    • All matching yellow silicone boost lines
    There's probably most likely alot of other parts and changes and processes done to it that I forgot to list... but that's the bulk of it.

    This is truly a one of a kind piece of artwork with incredible attention to detail and personal touches you wont find anywhere else. It is SPOTLESS, flawless, and BRAND NEW from top to bottom. There is enormous amount of money invested in the project. You are welcome to go over the ski with a fine tooth comb. You wont find anything missed. After I'm done working on it, i wipe it down and vaccuum out the engine compartment and cover it. I can ship it anywhere world-wide and can crate it incredibly well. All shipping and delivery costs and buyer's expense.

    Reason for selling is looking to step down from the performance arena of the sport and purchasing a boat with the money from this sale.

    If you have a serious inquiry, feel free to PM me, e-mail me, or call me.

    Thanks,
    STEVE
    [email protected]
    516-817-1903


  2. #2
    800AMSOIL4U's Avatar
    Join Date
    Aug 2006
    Location
    Morgan Hill, CA
    Posts
    5,024
    +1
    132
    Sorry to hear you are selling the project.

  3. #3

    Join Date
    May 2005
    Location
    ocean nj
    Posts
    781
    +1
    15
    I Hear Wedding Bells!

  4. #4
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120
    What kind of boat are you looking to get?

  5. #5
    EZ Dock of Long Island Shibby1485's Avatar
    Join Date
    May 2005
    Location
    Long Island, NY
    Posts
    9,464
    +1
    4
    Quote Originally Posted by speedskixp View Post
    What kind of boat are you looking to get?
    already bought one... bought a superboat. probably hang onto this for a little, i had my heart set on a skater but couldn't find the right one and was in a hurry to make a purchase

    so selling this ski sure would be nice to recoup the money spent on the boat

  6. #6
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120
    Man I would love to have this ski but by the looks of it I cant afford it. I think this is the nicest gprxp I have seen. Very nice work man. I think you should finish it so that you can atleast ride it once.

    Congrats on the boat. I just checked them out. Very nice.
    Last edited by speedskixp; 08-14-2008 at 07:17 PM.

  7. #7
    Not to get off the topic- what superboat did u buy?

  8. #8
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120
    He bought a 24 ft stepbottom.

  9. #9
    EZ Dock of Long Island Shibby1485's Avatar
    Join Date
    May 2005
    Location
    Long Island, NY
    Posts
    9,464
    +1
    4
    drove it non-stop the past 2 days... having a blast with it. i'll get pics up shortly of the boat

  10. #10
    EZ Dock of Long Island Shibby1485's Avatar
    Join Date
    May 2005
    Location
    Long Island, NY
    Posts
    9,464
    +1
    4
    ttt

    also found some other spare parts that go with the sale... riva tabs, stock tabs, jims plate, riva plate, another prop

    i'll give you two intercoolers -- both a stock and external IC so u can choose how u want to run this thing

    oh yea... i also have a bored out throttle body on this thing

    i'm sure i'm missing lots of stuff in my listing.. it's loaded

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS: Tachyon XC Helmet Camera BRAND NEW
    By krispaintballz in forum General Classifieds
    Replies: 11
    Last Post: 07-21-2009, 07:16 AM
  2. FS - Custom Turbocharged GPRXP w/ BRAND NEW EVERYTHING
    By Shibby1485 in forum Conversion Skis Classifieds
    Replies: 55
    Last Post: 01-07-2009, 08:41 PM
  3. FS - Custom Turbocharged GPRXP w/ BRAND NEW EVERYTHING
    By Shibby1485 in forum Yamaha 2 Stroke Skis
    Replies: 14
    Last Post: 12-14-2008, 02:53 PM
  4. FS: 2009 Yamaha VX Deluxe Brand New Seat(Silver/Gray)
    By steeevo66 in forum Yamaha Classifieds
    Replies: 0
    Last Post: 11-15-2008, 05:13 PM
  5. FS: C-Kit Supercharger Like Brand New
    By RXPDAVID in forum Sea Doo Classifieds
    Replies: 10
    Last Post: 10-07-2008, 07:31 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •