Thread: Fuel Gauge Problem
08-14-2008, 08:53 AM #1
- Join Date
- Aug 2008
Fuel Gauge Problem
I have a 99 GTX Limited. When I purchased it the gas gauge wasn't working. I replaced the float and did the fuse bypass fix posted earlier. When I put it back together it read "low fuel". I can short out the leads and it shows full. I thought it must be the circuit board on the fuel baffle so I replaced the fuel baffle with a brand new one. After putting it back together it still reads low fuel even though it has a half tank. Any idea of what could be the problem or are there any other tests I can run?
Thanks for any help.
08-14-2008, 02:27 PM #2
- Join Date
- Dec 2006
- Crest Hill, IL
Harold, welcome to the baords...
When you pulled the baffle, did you find the float and 2 magnets?
If not, look in the tank. usually what happen on the 99 fuel system is that the bottom of the baffle would pop off, thus the float comes out. Once it is out, the 2 magnets stick together and it will read LOW FUEL even when full....
Also, when you pulled the baffle, you didn't move the tank did you? because you can get the unit out laying the steering assemble down....
08-14-2008, 08:46 PM #3
08-14-2008, 08:49 PM #4
welcome to the forum Harold.
Check out these two links also
Once nice thing about the 3 seaters, just remove the bucket in the glove box by taking out the 4 retailer clips that hold the bucket in. just below, you will see the sending unit with access to pull it out.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Bama in forum 4-Tec PerformanceReplies: 4Last Post: 07-31-2012, 04:48 PM
By 9711stx in forum Kawasaki PWC Performance (2-stroke)Replies: 5Last Post: 04-13-2010, 08:40 PM
By JIMMY PITBULL in forum Kawasaki PWC Performance (4-stroke)Replies: 3Last Post: 10-10-2009, 12:27 AM
By JIMMY PITBULL in forum Kawasaki How To & FAQsReplies: 2Last Post: 10-03-2009, 03:58 PM
By vodomagoo in forum 2-Stroke PerformanceReplies: 1Last Post: 06-16-2009, 10:19 AM