Results 1 to 7 of 7
  1. #1

    What size pad under hydroturf for superjet?

    I am going to replace the tray pads on my '91 SuperJet. I am curious to see what size pad people are placing below the hydroturf in the tray of a standup. Hydroturf offers five pads: 1) 5mm; 2) 8 mm; 3) 8mm "plush"; 4) 25mm; 5) 25 mm "plush".

    I like the idea of a nice soft tray, but is 25mm TOO much?


  2. #2
    Moderator DrewNJ's Avatar
    Join Date
    Dec 2005
    Location
    Marlton, NJ
    Posts
    3,716
    +1
    1
    You'll get a ton of responses on this if you post it over on the X.
    With that being said, I don't run any padding under the turf of my SJ...However, It came that way..
    Doug

  3. #3
    I don't know what "the x" is. Is that another forum on this site, or another site altogether?

  4. #4

    Join Date
    Aug 2007
    Location
    Tucson, AZ
    Posts
    54
    Freeriders X-H2O. See the links to your left. Very big with the stand-up community. Green Hulk, not so much.

  5. #5
    Moderator DrewNJ's Avatar
    Join Date
    Dec 2005
    Location
    Marlton, NJ
    Posts
    3,716
    +1
    1
    yep,
    www.x-h2o.com everything you ever wanted to know about stand ups..

  6. #6
    cheatin' piston popper addicted's Avatar
    Join Date
    Jul 2006
    Location
    north jersey
    Posts
    6,188
    +1
    176
    Not sure what the plush is, but go with the 25mm and thank me later. . . your knees will too

  7. #7
    I was told by HydroTurf that the plush is a softer form of the bad; my interpretation is that you likely sink into it a bit more than the regular.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What size t-Bolt clamp for SHO throttle body coupling?
    By Ski Hacks MG in forum Yamaha PWC Performance (4-stroke)
    Replies: 4
    Last Post: 06-19-2015, 10:04 AM
  2. what size drill and tap for wideband
    By Branden in forum 4-Tec Performance
    Replies: 27
    Last Post: 04-23-2015, 08:55 PM
  3. What Size Watcon Impeller Gauge For 2007RXP
    By oz_speed in forum 4-Tec Performance
    Replies: 3
    Last Post: 09-21-2011, 03:29 PM
  4. What is the best mode under $500 for my 2004 Gtx/Sc
    By wildman1998 in forum 4-Tec Performance
    Replies: 10
    Last Post: 04-15-2007, 06:53 PM
  5. What size bit and tap for dynotune gauge
    By excess in forum 4-Tec Performance
    Replies: 5
    Last Post: 06-30-2006, 06:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •