Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 21
  1. #1

    Join Date
    Jun 2007
    Location
    Harrisburg PA
    Posts
    111

    97 waveventurer 1100 carbs

    Does anyone know which Mikuni SBN carbs are on this ski and which replacement carbs will work?

    They are in pretty bad shape, with the majority of the screws being stripped. I'm debating weather or not to look for replacements used or new. Or use a screw extractor and buy the stainless bolt kits/rebuild kits.


  2. #2
    38 mm Mikuni sbn's you could find a rack on ebay

  3. #3

  4. #4

    Join Date
    Jun 2007
    Location
    Harrisburg PA
    Posts
    111
    So the carbs off the 96 will fit? I just want to make sure.

  5. #5
    you may need to verify jetting

  6. #6

    Join Date
    Jun 2007
    Location
    Harrisburg PA
    Posts
    111
    Great Thank you. I'm sure it's on this website somewhere, but would you know where I can find the proper jetting and tuning recomendations for this ski.

  7. #7
    looks like they use the same jetting according to the OEM microfiche but the 1100 had some updated jetting requirements and I don't know if they applied to yours? as far as tunning look at the how to section for reading plugs and piston was etc

  8. #8

    Join Date
    Jun 2007
    Location
    Harrisburg PA
    Posts
    111
    I was able to get the carbs apart with the magical impact driver from Harbor Frieght. Best $6 I've spent in a while.

    I'm soaking the carbs in gas in a coffee can. Hopefully they will clean up nicely and will be usable. Any other cleaner work well? I was going to buy the rebuild kits from sbt, not sure where to buy the jets yet. Do you suggest anyone else?

  9. #9

    Join Date
    May 2008
    Location
    Savannah, GA
    Posts
    452
    Get Mikuni kits is my best advice. I have not used SBTs but many others here know the difference.

  10. #10

    Join Date
    May 2008
    Location
    Savannah, GA
    Posts
    452
    As far as jets are concerned; Carl at Island Racing has what you need...that is where I bought mine.

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 97 waveventure 1100 blowing fuel out carbs
    By Tnfocus in forum Yamaha Old School Skis
    Replies: 30
    Last Post: 04-24-2014, 12:17 PM
  2. 1996 Waveventure 1100 Carb Help
    By kcc0521 in forum Yamaha Old School Skis
    Replies: 3
    Last Post: 03-13-2011, 10:28 AM
  3. Replies: 4
    Last Post: 04-25-2010, 09:32 PM
  4. 97 Waveventure 1100 PTO rod won..case lost
    By mstbone67a in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 07-27-2009, 09:44 PM
  5. Needing ASAP [97 waveventure 1100 speedo]
    By HallPass in forum Yamaha Old School Skis
    Replies: 10
    Last Post: 08-27-2007, 06:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •