Results 1 to 4 of 4
  1. #1

    Fitting the triples

    Does anyone have pictures of were i need to trim out the hall or adjust battery box for the factory triple pipes. How about were the water lines go to and from. Thanks


  2. #2
    Pistonwash's Avatar
    Join Date
    Aug 2005
    Location
    Florida
    Posts
    3,595
    +1
    77

    Re: Fitting the triples

    Quote Originally Posted by John
    Does anyone have pictures of were i need to trim out the hall or adjust battery box for the factory triple pipes. How about were the water lines go to and from. Thanks
    You do not need to trim out the hull.

    You do not need to adjust the battery box.

    You need to get instructions on water routing from Factory Pipe They may even have down-loadable instructions online.

    http://factorypipe.com/Technical/Ins...tructions.html

  3. #3
    For a GPR you will probably need to grind some off the front left motor mount. Also check the PTO pipe clearing the bottom right of the electrical box. You may need to enlarge the holes to move the box a little. They all fit a little differant.

  4. #4
    John you do need to enlarge the holes on the battery tray that support the electrical box, you want the box as high as you can and towards the exhaust side of the engine, otherwise the PTO pipe may hit the box and it may put a hole in it. Also follow Jay´s recommendations.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. will the fx free flow exhaust mod fit the vx
    By nev350 in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 07-08-2007, 05:43 PM
  2. Will the SS wear rings fit the jet boats.
    By DSquare in forum Sea Doo Sport Boats
    Replies: 3
    Last Post: 06-25-2007, 09:03 PM
  3. Will the 2005 GP1300r side covers fit the '06/'07
    By jcorallo in forum Yamaha PWC Performance (2-stroke)
    Replies: 16
    Last Post: 01-28-2007, 02:56 PM
  4. How much oil for the triple bearing mod?
    By rxpblast in forum 4-Tec Performance
    Replies: 3
    Last Post: 01-11-2007, 10:40 PM
  5. For those with the triple bearing mod.............
    By Jeff C in forum Sea Doo Open Discussion
    Replies: 28
    Last Post: 05-26-2006, 10:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •