Results 1 to 3 of 3
  1. #1

    Join Date
    Dec 2005
    Location
    australia
    Posts
    16

    piston to bore clearance

    i lifted the head on my 66v and it seams to have lots of piston movement how much it good for 75 hours or how much is to much


  2. #2
    All hail the Chief! fullboogie's Avatar
    Join Date
    Nov 2005
    Location
    Texas
    Posts
    3,155
    +1
    44
    Yeah, it always amazes me how sloppy the pistons are in the bore. It's because there's a slight taper from bottom to top, so you will get noticable rocking back and forth of the piston. As long as your compression is reading ok, I wouldn't worry about it.

  3. #3

    Join Date
    Dec 2005
    Location
    australia
    Posts
    16
    that is what i wanted to hear good news

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Piston to wall clearance 1200slx can not find it /wellll\ ????
    By Fenderjack in forum Polaris Open Discussion
    Replies: 10
    Last Post: 07-18-2015, 08:26 AM
  2. 2002 4TEC .004" piston to wall clearance too much?
    By WS6 GreeN in forum 4-Tec Performance
    Replies: 2
    Last Post: 06-30-2015, 11:04 AM
  3. Piston to wall clearance? I have no spec.
    By pjv911 in forum 4-Tec Performance
    Replies: 13
    Last Post: 05-16-2014, 01:10 PM
  4. Ring end gap and piston to wall clearance?
    By jdogfunk in forum Polaris Open Discussion
    Replies: 6
    Last Post: 07-12-2011, 08:41 PM
  5. weisco piston to cylinder clearance
    By pnwzxi in forum Kawasaki PWC Performance (2-stroke)
    Replies: 5
    Last Post: 06-11-2009, 10:04 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •