Thread: Plug gap on a 951 motor
08-23-2008, 10:02 AM #1
- Join Date
- May 2008
- Braidwood, IL
Plug gap on a 951 motor
I have a 2000 Sea doo GTX with a 951, and the dealer told me the plugs should be gapped at .016 is that correct? Just seemed like that would be to close.
08-23-2008, 10:16 AM #2
always gapped my 951's at .022-.024 which is typically what BR8ES plugs come gapped with..
08-23-2008, 10:07 PM #3
in my parts book it says the gap should be set at .20 on the 951 ive been using the champion plugs, better luck with them than the ngks
08-24-2008, 07:22 PM #4
Dont use Champion and set the correct plugs to 22 it makes a differnce and allows for wear.
08-24-2008, 10:30 PM #5
08-25-2008, 04:07 PM #6
I never never had good luck with champions.. I use NGK in everthing even Yamaha's.. No fouling here. But the VX110's arent so lucky
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By nick34 in forum Sea Doo ClassifiedsReplies: 3Last Post: 10-21-2010, 05:57 PM
By ugadawg131 in forum Polaris Open DiscussionReplies: 4Last Post: 12-19-2006, 07:46 PM
By Snoman in forum 4-Tec PerformanceReplies: 9Last Post: 07-21-2006, 04:02 PM
By 05RXPnoob in forum 4-Tec PerformanceReplies: 0Last Post: 06-03-2006, 12:52 PM
By Cutter in forum 4-Tec PerformanceReplies: 6Last Post: 07-07-2005, 03:47 PM