08-26-2008, 08:41 PM #1
Riva Thru Hull Exhaust Install - help
How accurate does the exhaust hole have to be? As you can see in the pic the paper doesn't line up with the top of the hull on the back even though it is to the bottom of the cleat cutout. I really don't want to mess this up if it has to be spot on. But if the exhaust will still line up even if it is a 1/2" or so off I won't stress as much.
Next question - Is this the correct order for the exahust tip?
Rear (outside hull) <---------------> Front of boat (inside hull)
Exhaust Tip -> rubber gasket -> hull -> retainer ring
Thanks for the help
08-26-2008, 08:43 PM #2
Looks perfect. Drill the hole!
08-26-2008, 08:45 PM #3
Thats all I needed to hear
Is the order of the exhaust tip assembly correct?
08-26-2008, 08:53 PM #4
- Join Date
- Dec 2006
- Crest Hill, IL
08-26-2008, 09:03 PM #5
08-26-2008, 09:07 PM #6
- Join Date
- Jan 2007
- Lakeland, FL
You have the order of the assembly correct. The only thing to add is that you'll need some "Right Stuff" gasket maker on the retainer ring pressing against the inside of the hull. You'll also need a lot of it around the stock block-off to prevent leaks.
08-26-2008, 09:22 PM #7
I have parts of the sticker painted on the inside of the exhaust so you can read it from every direction.
08-26-2008, 09:54 PM #8
08-26-2008, 10:16 PM #9
Like the RUDE Much Better
08-27-2008, 07:08 AM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By ms4cd in forum 4-Tec PerformanceReplies: 5Last Post: 07-13-2012, 04:49 PM
By CarFanatic in forum 4-Tec PerformanceReplies: 13Last Post: 07-20-2006, 10:37 PM
By RXPDAVID in forum 4-Tec PerformanceReplies: 4Last Post: 08-03-2005, 05:05 PM
By RXPDAVID in forum 4-Tec PerformanceReplies: 5Last Post: 07-10-2005, 11:19 AM
By Green Hulk in forum 4-Tec PerformanceReplies: 46Last Post: 06-30-2005, 10:03 PM