Results 1 to 4 of 4
  1. #1

    First ride after some work

    hey guys,
    I need some help on a problem on my 150. had some posts earlier about it acting a little skiddish. I have had the heat exchanger changed and put everything back together, but it will still only max out at 47mph/5900rpm. If this was a normal engine, I would compare it to a engine running on choke. The turbo meter would increase from nothing to a little over half way. I have changed the fuel filter, battery and had to have a new rod put in a couple months ago. Any advice appreciated. thanks logan

  2. #2
    Click avatar for tech links/info, donation request K447's Avatar
    Join Date
    Jul 2007
    near Toronto, Canada
    Any warning messages or lamps on the display?

    Have you checked the waste gate for smooth operation?

  3. #3
    The waste gate works with some resistance like you guys talked about, but i'm not to sure how far it should move.

  4. #4
    there was a check engine light that would come on wheni first cranked up, i know about it going off after a few seconds, but this one would stay on for the whhole acceleration. Maybe 15 seconds, i guess. It just seemed like it had no power taking off

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. First ride ever,first ride after rebuild need guidance please
    By chevydog in forum Yamaha PWC Performance (2-stroke)
    Replies: 34
    Last Post: 09-16-2013, 05:17 AM
  2. first ride after two months and warning ticket
    By mikem0987 in forum Polaris Open Discussion
    Replies: 5
    Last Post: 08-17-2008, 01:45 PM
  3. First ride after filling rideplate holes!
    By mksmi in forum 4-Tec Performance
    Replies: 14
    Last Post: 12-30-2007, 12:09 AM
  4. first ride after modifications
    By gorilla03 in forum Polaris Open Discussion
    Replies: 58
    Last Post: 07-26-2007, 11:32 PM
  5. First ride after rebuild, what do I do next????
    By seaobin in forum Polaris Open Discussion
    Replies: 14
    Last Post: 07-22-2007, 12:03 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts