Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1
    Steve STSPERFORMANCE's Avatar
    Join Date
    Dec 2007
    Location
    Cambridge, Ohio
    Posts
    2,701
    +1
    116

    My Custom Rxtx Exhaust And Waterbox

    WELL, HERE IT IS.. CUSTOM WATERBOX AND EXHAUST MADE BY ME.

    SOME OF THE PICS ARE KINDA BAD, WILL POST NEW TOMORROW. WATERBOX IS MADE OF 1/8" WALL STAINLESS PIPE WITH THE SAME THICKNESS IN THE END CAP. NO BLOWOUTS GONNA HAPPEN HERE! THE STINGER PIPE ENDS HALFWAY PAST THE PIPE THAT COMES OUT THE TOP. THE HOLES IN THE STINGER PIPE WERE DRILLED OUT TO 3/16" TO ALLOW FOR SLIGHTLY MORE WATERFLOW TO THE BOX SINCE I ELIMINATED THE FITTING ON THE TOP THAT THE STOCK ONE HAS. MOVED THE STOCK WATERBOX BRACKET BACK A LITTLE AND UTILIZED THE STCK RUBBER HOLDOWN SETUP TO KEEP THE BOX SNUG AGAINST THE SILICON AND HARD RUBBER "BASE" THE BOX SITS ON. PLAN TO INSTALL THE OEM SENSOR IN THE PIPE AS SOON AS I CAN LOCATE A BUNG FOR THE SENSOR TO FIT IN. TAILPIPE IS 1/2 FREEFLOW PIPE AND THE BACK HALF IS RIVA EXHAUST PIPE. JUST PUT THRU HULL FITTING IN TODAY SO TAILPIPE WILL GO IN TOMORROW.

    DID THIS TO THINK OF SOMETHING ELSE OTHER THAN THE CRACK IN THE TUNNEL... SHOULD SOUND AWESOME !!!!!!!!

    SO COME ON EVERYBODY, THOUGHTS, SUGGESTIONS, GONNA WORK, ANINT GONNA WORK...

    BY THE WAY THE TAILPIPE GOES UP HIGH ENOUGH TO PREVENT WATER INGESTION, KINDA LIKE A JPIPE, AND THE BOX IS STILL ANGLED DOWN FOR ALL YOU WATER INGESTION PEOPLE!!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	sidefx 043.jpg 
Views:	64 
Size:	341.2 KB 
ID:	91940   Click image for larger version. 

Name:	sidefx 042.jpg 
Views:	81 
Size:	348.0 KB 
ID:	91941   Click image for larger version. 

Name:	sidefx 041.jpg 
Views:	104 
Size:	346.6 KB 
ID:	91942   Click image for larger version. 

Name:	sidefx 040.jpg 
Views:	59 
Size:	333.1 KB 
ID:	91943   Click image for larger version. 

Name:	sidefx 039.jpg 
Views:	64 
Size:	319.5 KB 
ID:	91944   Click image for larger version. 

Name:	sidefx 038.jpg 
Views:	104 
Size:	343.3 KB 
ID:	91945  

    Click image for larger version. 

Name:	sidefx 037.jpg 
Views:	91 
Size:	341.6 KB 
ID:	91946   Click image for larger version. 

Name:	sidefx 036.jpg 
Views:	75 
Size:	351.8 KB 
ID:	91947  


  2. #2
    i make, break, and fix things 08255's Avatar
    Join Date
    Mar 2008
    Location
    NOVA - Pohick Bay/Lake Anna
    Posts
    285
    i love personal innovation. screw the big companies bending and welding pipes for us and charging 300% mark-up for "research and development"

    backyard engineering right thur

  3. #3
    The powder Man!! ashelgren's Avatar
    Join Date
    Jun 2008
    Location
    Geigertown , Pa
    Posts
    166
    looks killer for home made great job only one way to see what its going to do let her rip tell us about it

  4. #4
    West Texas RXP skoepp's Avatar
    Join Date
    Oct 2007
    Location
    west texas
    Posts
    12,019
    +1
    149
    Very nice innovation.
    Good Luck! Pm sent.

  5. #5
    Big K's son KeithKman's Avatar
    Join Date
    Dec 2006
    Location
    Southern California
    Posts
    1,735
    Looks good. Post pics and video when it is all installed!

  6. #6
    Banned User
    Join Date
    May 2008
    Location
    Lake Havasu
    Posts
    2,924
    +1
    27
    559729507_d8172abaa5.jpg


    I think its going to be really loud. Let us know what it sounds like.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	559729507_d8172abaa5.jpg 
Views:	149 
Size:	74.9 KB 
ID:	92049  

  7. #7
    duty's Avatar
    Join Date
    Jul 2007
    Location
    New Jersey, United States
    Posts
    226
    +1
    1
    Quote Originally Posted by STSPERFORMANCE View Post
    WELL, HERE IT IS.. CUSTOM WATERBOX AND EXHAUST MADE BY ME.

    SOME OF THE PICS ARE KINDA BAD, WILL POST NEW TOMORROW. WATERBOX IS MADE OF 1/8" WALL STAINLESS PIPE WITH THE SAME THICKNESS IN THE END CAP. NO BLOWOUTS GONNA HAPPEN HERE! THE STINGER PIPE ENDS HALFWAY PAST THE PIPE THAT COMES OUT THE TOP. THE HOLES IN THE STINGER PIPE WERE DRILLED OUT TO 3/16" TO ALLOW FOR SLIGHTLY MORE WATERFLOW TO THE BOX SINCE I ELIMINATED THE FITTING ON THE TOP THAT THE STOCK ONE HAS. MOVED THE STOCK WATERBOX BRACKET BACK A LITTLE AND UTILIZED THE STCK RUBBER HOLDOWN SETUP TO KEEP THE BOX SNUG AGAINST THE SILICON AND HARD RUBBER "BASE" THE BOX SITS ON. PLAN TO INSTALL THE OEM SENSOR IN THE PIPE AS SOON AS I CAN LOCATE A BUNG FOR THE SENSOR TO FIT IN. TAILPIPE IS 1/2 FREEFLOW PIPE AND THE BACK HALF IS RIVA EXHAUST PIPE. JUST PUT THRU HULL FITTING IN TODAY SO TAILPIPE WILL GO IN TOMORROW.

    DID THIS TO THINK OF SOMETHING ELSE OTHER THAN THE CRACK IN THE TUNNEL... SHOULD SOUND AWESOME !!!!!!!!

    SO COME ON EVERYBODY, THOUGHTS, SUGGESTIONS, GONNA WORK, ANINT GONNA WORK...

    BY THE WAY THE TAILPIPE GOES UP HIGH ENOUGH TO PREVENT WATER INGESTION, KINDA LIKE A JPIPE, AND THE BOX IS STILL ANGLED DOWN FOR ALL YOU WATER INGESTION PEOPLE!!
    bad ass what $$$$$ you got into this ? and want to hear it plssssssssssssss

  8. #8
    Steve STSPERFORMANCE's Avatar
    Join Date
    Dec 2007
    Location
    Cambridge, Ohio
    Posts
    2,701
    +1
    116
    cheap, Cheap, Cheap!!!

    as Soon As I Get My Pump Shoe Issue Figured Out I Will Post A Video...

    my Welding Job Is Worth More Than The Parts!!!:d :d

    hope It Sounds Like A Pissed Off Harley!!!

  9. #9
    Poppa Dawg's Avatar
    Join Date
    Dec 2005
    Location
    Alice. Texas
    Posts
    1,015
    +1
    49
    Nice job. Looks very familiar. You will enjoy the sound.

  10. #10
    apactorpedo's Avatar
    Join Date
    Aug 2006
    Location
    Lake Mount, FL
    Posts
    191
    well does it smell like a mad hog..............or a dead dog

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How To - Through Hull Exhaust and Waterbox - Pics for now
    By bryantjopplin in forum Yamaha PWC Performance (4-stroke)
    Replies: 22
    Last Post: 07-19-2013, 10:04 AM
  2. New and need help diagnosing my '08 rxtx
    By dr_hunt in forum 4-Tec Performance
    Replies: 50
    Last Post: 06-28-2008, 06:16 AM
  3. My Custom Raider Exhaust
    By big raider in forum Yamaha Old School Skis
    Replies: 20
    Last Post: 06-23-2008, 01:42 PM
  4. My custom exhaust tip and riva seat cover
    By HoopsRXT in forum Sea Doo Open Discussion
    Replies: 14
    Last Post: 12-12-2006, 11:30 PM
  5. Want my RXP Exhaust AND blower to be LOUD...
    By BoostedRXP in forum 4-Tec Performance
    Replies: 57
    Last Post: 07-06-2006, 07:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •