Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1

    Join Date
    Dec 2006
    Location
    Charlotte, NC Lake Wylie
    Posts
    132

    Is this part availible? 07' RXP

    I had a hard time removing one of the cooling lines from where it attached to the ride plate on the inside of the ski. It was coated with the selaent that they used to seal the plate to the hull. Anyway ended up cracking the plastic fitting that the hose fitting screws onto. I removed the top part of the ride plate and it is just a plastic fitting that would be easy top replace b ut can't find it on the fisch anywhere as a separate part. Does anyone have a bad plate or a part number so i can order one? I would hate to have to order a new ride plate for such a small part.

    Thanks


  2. #2
    Dr Len's Avatar
    Join Date
    Jan 2006
    Location
    New Jersey Attitude Capital of the World
    Posts
    1,170
    You have to buy a new ride plate. This happened to a friend of mine he had to buy the whole thing.

    I KNOW THAT SUCKS

  3. #3

    Join Date
    Dec 2006
    Location
    Charlotte, NC Lake Wylie
    Posts
    132
    Do you think your friend has the old ride plate with one good fitting maybe I can buy it from him?

  4. #4
    REID2168's Avatar
    Join Date
    Jun 2007
    Location
    My House
    Posts
    8,156
    +1
    241
    u DONT have to get a new plate and these are the two part numbers u need friend!

    293710111 is the plastic fitting that screws onto the plastic piece in the plate and the coolant hose attaches to inside the hull

    293710114 is the plastic piece inside the plate that can only be removed by diassembling the plate


    good luck and use silicone when u reassemble your plate and u should be good to go!

  5. #5

    Join Date
    Apr 2005
    Location
    Jax,FL
    Posts
    2,677
    +1
    24
    What Reid Said

  6. #6
    Dr Len's Avatar
    Join Date
    Jan 2006
    Location
    New Jersey Attitude Capital of the World
    Posts
    1,170
    From what I heard those part #s are no longer available

  7. #7
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120
    Quote Originally Posted by Dr Len View Post
    From what I heard those part #s are no longer available
    I think on the older 04 boats the fittings were different and could not be replaced but the newer ones can.

  8. #8
    The ski's have taken a "backseat" to the Corvette DarthAWM's Avatar
    Join Date
    Nov 2007
    Location
    Odessa, TX
    Posts
    5,364
    Quote Originally Posted by Dr Len View Post
    You have to buy a new ride plate. This happened to a friend of mine he had to buy the whole thing.

    I KNOW THAT SUCKS
    You do not, I snapped mine off removing the plate, but Jim had the lower portion. The upper portion is p/n 293710111. you will have to separate the top and bottom of the ride plate, as well as remove it from the ski.

  9. #9

    Join Date
    Dec 2006
    Location
    Charlotte, NC Lake Wylie
    Posts
    132
    I have separated the top and bottom part of the ride plate and will try to order the lower part this week. Hope it is the correct one and I can get it back on the water.

    All of this work from sucking up a rope and damaging the wear ring and the veins on the pump support plate. What a PITA.....

  10. #10

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Parting out 07 rxp stage 3+++
    By palmbeach jesse in forum Sea Doo Classifieds
    Replies: 150
    Last Post: 06-28-2009, 07:39 AM
  2. f/s: stock parts for 07 RXP
    By pet in forum Sea Doo Classifieds
    Replies: 2
    Last Post: 09-13-2008, 09:09 PM
  3. What is this part, and why do I need it??
    By boostaholic in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 04-30-2008, 12:21 PM
  4. What is this part?
    By J-ME in forum Honda Open Discussion
    Replies: 4
    Last Post: 04-28-2007, 10:51 AM
  5. Is this part necessary?
    By janetmojo in forum Yamaha Old School Skis
    Replies: 9
    Last Post: 03-29-2007, 01:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •