Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 41
  1. #1
    Banned User
    Join Date
    Jul 2006
    Location
    Ft.Lauderdale
    Posts
    3,237

    Help installing Race tech RRFPR

    I searched for How to install RRFPR and couldn't find any write ups..Anyone have any good hints or suggustions?

    Thanks,


    Alex
    Last edited by Alex13; 09-11-2008 at 08:04 PM.


  2. #2
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120
    Its realy simple, Just remove the metal strap holding the stock regulator in and disconnect the fuel line. Remove the regulator and install the new one with the gauge facing the rr so that the metal strap can go back on in the correct position. You may have to wiggle it around a little and press it in. Be carefull not to turn it back and forth to much or you could break the little vent line nipple that comes out of the tank/pump.( dont ask how I know) Install the metal strap, hook up the fuel line and boost line to a pre tapped IC block off and you are set to adjust the pressure. Set the pressure to 60lbs if using stock injectors with lanyard plugged in and ski not running. You will need to cycle the pump a few times to get it set correctly.

  3. #3
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Alex, did you get the directions that come with it? If you still have trouble tomorrow PM me your phone number and i will call you and walk you thru it. It's EASY

  4. #4
    Yellowsierra's Avatar
    Join Date
    Aug 2008
    Location
    Andrews, NC
    Posts
    143
    Quote Originally Posted by Green Hulk View Post
    Alex, did you get the directions that come with it? If you still have trouble tomorrow PM me your phone number and i will call you and walk you thru it. It's EASY
    If your using the stock intercooler(07 RXP) where is a good place to put the boost reference?

    Justin

  5. #5
    Banned User
    Join Date
    Jul 2006
    Location
    Ft.Lauderdale
    Posts
    3,237
    Quote Originally Posted by Green Hulk View Post
    Alex, did you get the directions that come with it? If you still have trouble tomorrow PM me your phone number and i will call you and walk you thru it. It's EASY
    Your PM's full Jerry..

  6. #6
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    Intake Manifold....There should be 3 runners on top..Youl have to tap into one of them..

  7. #7
    Banned User
    Join Date
    Jul 2006
    Location
    Ft.Lauderdale
    Posts
    3,237

    Boost gauge

    With my set-up should I T into the boost line going to the RRFPR?

    Will you guys post completed install pictures please?

    Thanks,

    Alex
    Last edited by Alex13; 09-11-2008 at 06:51 PM.

  8. #8
    Yellowsierra's Avatar
    Join Date
    Aug 2008
    Location
    Andrews, NC
    Posts
    143
    Quote Originally Posted by Snoman View Post
    Intake Manifold....There should be 3 runners on top..Youl have to tap into one of them..

    I might tap into the outlet of the supercharger. Like they do on aftermarket turbos. That would give the highest and fastest boost pressure.

    Justin

  9. #9
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Quote Originally Posted by Alex13 View Post
    Your PM's full Jerry..
    sorry! At airport now will be home late tonight. Will try to clean out pm box in the morning

  10. #10
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    Quote Originally Posted by Yellowsierra View Post
    I might tap into the outlet of the supercharger. Like they do on aftermarket turbos. That would give the highest and fastest boost pressure.

    Justin
    no! Must be manifold pressure

Page 1 of 5 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 6
    Last Post: 08-15-2013, 10:06 AM
  2. Need Help Installing Rrfpr!!!
    By dsmcrazy79 in forum 4-Tec Performance
    Replies: 8
    Last Post: 07-12-2008, 06:02 PM
  3. HELP Rotex Racing IC installation
    By BlackHawk in forum 4-Tec Performance
    Replies: 4
    Last Post: 11-10-2006, 09:32 AM
  4. NEW CAMERA!! So here are some pics of my Race Tech kit
    By two2curupt in forum 4-Tec Performance
    Replies: 10
    Last Post: 06-27-2005, 07:45 AM
  5. Results of Stage I Kit from Race Tech
    By Red Devil in forum 4-Tec Performance
    Replies: 12
    Last Post: 06-18-2005, 06:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •