Thread: Jug/head question, SLX780???
09-12-2008, 08:40 PM #1
Jug/head question, SLX780???
Listen, one thing I do not have the info on is why the 1 (B) stamped on the PTO and CEN heads but a 2 on the MAG? Are these heads actually different, cannot be interchanged? Is the MAG jug different as well than the CEN and PTO? Basically, can I use a 1 (B) head and jug in place of the MAG 2 stuff?
Thx much, little confused here.
09-12-2008, 08:50 PM #2
I have been told that they are mold identifier marks. They tell what mold they were poured in. Any stock head should work on any cylinder.
09-12-2008, 09:10 PM #3
SO, the jug is the same as well? All 3 jugs identical?
09-12-2008, 09:14 PM #4
09-12-2008, 09:21 PM #5
AND, thx much, appreciate your time.
Know where I can get a Pro 785 CDI by chance?!?!?
09-12-2008, 09:43 PM #6
09-12-2008, 09:45 PM #7
- Join Date
- Aug 2006
- Homer Glen Il.
09-13-2008, 05:03 AM #8
09-13-2008, 09:16 AM #9
Yeah, true, but need 33 deg for sure to run 44mm slurpers and a 93 dry pipe, let alone everything fatter. Just working on a winter geee-rage project set.
09-13-2008, 11:18 AM #10
- Join Date
- Oct 2006
- Cleveland OH
Try to locate a 92 dry pipe for your project. The general consensus is the 92 is better than the 93 dry pipe.
I wish SeaLion would come back around. He had a 780 with that exact set up you're looking to do. He said it absolutely ripped...
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By r33pwrd in forum Yamaha PWC Performance (2-stroke)Replies: 8Last Post: 12-10-2006, 10:20 PM
By absentx in forum Polaris PWC PerformanceReplies: 8Last Post: 09-05-2006, 04:23 AM
By washingtonrider in forum Yamaha PWC Performance (2-stroke)Replies: 9Last Post: 08-08-2006, 02:24 PM
By shooter98xpl in forum Yamaha PWC Performance (2-stroke)Replies: 12Last Post: 12-19-2005, 10:24 PM
By shooter98xpl in forum Yamaha PWC Performance (2-stroke)Replies: 7Last Post: 12-13-2005, 11:22 AM