Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1
    noshowallgo's Avatar
    Join Date
    Mar 2007
    Location
    GA
    Posts
    133
    +1
    1

    Question Need Advice From Everyone Please!

    I installed some waveeater yesterday when i took the covers of cylinder 1 and 2 had signs of water inside 3 had nothing. Seals on there are perfect all three of them. Where is the water coming from ? is this going to give me more problems in the future? everyone please add your knowledge. Thank you.


  2. #2
    WATER WOODY's Avatar
    Join Date
    Aug 2005
    Location
    Minden, Nevada, United States
    Posts
    10,664
    +1
    11
    have you looked in the cylinders yet?

  3. #3
    noshowallgo's Avatar
    Join Date
    Mar 2007
    Location
    GA
    Posts
    133
    +1
    1
    where and how do i get into cylinders?

  4. #4
    WATER WOODY's Avatar
    Join Date
    Aug 2005
    Location
    Minden, Nevada, United States
    Posts
    10,664
    +1
    11
    Can you take good pics of the water intrusion first before taking anything apart? Thanks

  5. #5
    There is no winter in Hawaii! tnerb's Avatar
    Join Date
    Dec 2007
    Location
    Hawaii
    Posts
    154
    When I did mine back in April 2 of the cylinders looked like there was water in the goop that was inside the cover. #1 and 3 had creamy brown goop in the pics below. When I cleaned it out the water soaked into the paper towel differently then the greasy goop. The #2 is the black one.

    Is yours a lot of water or like this? No problems with mine yet.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_0052.JPG 
Views:	44 
Size:	515.8 KB 
ID:	94342   Click image for larger version. 

Name:	IMG_0059.JPG 
Views:	31 
Size:	668.7 KB 
ID:	94343   Click image for larger version. 

Name:	IMG_0063.JPG 
Views:	35 
Size:	601.0 KB 
ID:	94344  

  6. #6
    Moderated
    Join Date
    Oct 2006
    Posts
    3,711
    Quote Originally Posted by tnerb View Post
    When I did mine back in April 2 of the cylinders looked like there was water in the goop that was inside the cover. #1 and 3 had creamy brown goop in the pics below. When I cleaned it out the water soaked into the paper towel differently then the greasy goop. The #2 is the black one.

    Is yours a lot of water or like this? No problems with mine yet.

    I bet your using yamalube for oil, is this correct?

  7. #7

    Join Date
    Aug 2005
    Location
    Gold Coast Australia
    Posts
    269
    #1 on my GPR had that look when I first put the clips on years ago.
    Cleaned it out with those things some people stick in their ears----very dangerous by the way, and over the years took the covers off just to take a look see and all was normal.
    I only ever used Valvoline TCW3.

  8. #8
    There is no winter in Hawaii! tnerb's Avatar
    Join Date
    Dec 2007
    Location
    Hawaii
    Posts
    154
    Quote Originally Posted by izz0 View Post
    I bet your using yamalube for oil, is this correct?
    Yup. changing over to amsoil as soon as I run out. I bought the ski used and that is all the previous owner used and all I have used since I bought it.

  9. #9
    noshowallgo's Avatar
    Join Date
    Mar 2007
    Location
    GA
    Posts
    133
    +1
    1

    Smile

    Quote Originally Posted by tnerb View Post
    When I did mine back in April 2 of the cylinders looked like there was water in the goop that was inside the cover. #1 and 3 had creamy brown goop in the pics below. When I cleaned it out the water soaked into the paper towel differently then the greasy goop. The #2 is the black one.

    Is yours a lot of water or like this? No problems with mine yet.
    just like your little bit brown not much water.

  10. #10
    noshowallgo's Avatar
    Join Date
    Mar 2007
    Location
    GA
    Posts
    133
    +1
    1

    Smile

    Quote Originally Posted by izz0 View Post
    I bet your using yamalube for oil, is this correct?
    not in the last 6 month pennzoil but before yes.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. need help from pros please
    By mrjetskey in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 06-02-2013, 06:44 AM
  2. Replies: 17
    Last Post: 03-02-2012, 08:44 AM
  3. Replies: 16
    Last Post: 07-14-2011, 05:15 PM
  4. I need big help everyone please take one sec to read
    By noshowallgo in forum Yamaha PWC Performance (2-stroke)
    Replies: 18
    Last Post: 08-08-2009, 08:14 AM
  5. Need advice from creative techs, I'm building a prototype.
    By ccassone in forum 2-Stroke Performance
    Replies: 12
    Last Post: 01-18-2006, 06:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •