Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22
  1. #1

    What trippples fit a SL750?

    Do the pro 785 trippples fit a SL750? And what do i need to do to make them work.

    Smaller fuel tank? Relocate electrical box?

    Does it replace the muffler as well?


  2. #2

    Join Date
    Aug 2006
    Location
    Homer Glen Il.
    Posts
    8,704
    +1
    109
    Save your time and money and just buy a 785 way easier and much faster

  3. #3
    Quote Originally Posted by 785 lugs View Post
    Save your time and money and just buy a 785 way easier and much faster
    If im buying a new ski its going to be a Honda. But i might keep this one for a while.

    I can get jet works 785 pipes for $250, so... Do i get them?

  4. #4

    Join Date
    Aug 2006
    Location
    Homer Glen Il.
    Posts
    8,704
    +1
    109
    Quote Originally Posted by ZOMGVTEK View Post
    If im buying a new ski its going to be a Honda. But i might keep this one for a while.

    I can get jet works 785 pipes for $250, so... Do i get them?
    they will not fit without tons of work ,they don't bolt right up you will spend around another 1000.00 to make them work just checkout Starflights project .

  5. #5
    So, they dont bolt to the exhaust on the jugs? If i need to cut a huge hole in the hull and move things around im fine with that. I can run through hull with a rubber pipe, so lining things up is no issue. Hell, i dont even need a waterbox. I could run each tripple right into a hole in the ski.

    Its just the question of if it will mechanically bolt onto the cyls. But it isnt sounding good.

  6. #6

    Join Date
    Aug 2006
    Location
    Homer Glen Il.
    Posts
    8,704
    +1
    109
    Quote Originally Posted by ZOMGVTEK View Post
    So, they dont bolt to the exhaust on the jugs? If i need to cut a huge hole in the hull and move things around im fine with that. I can run through hull with a rubber pipe, so lining things up is no issue.

    Its just the question of if it will mechanically bolt onto the cyls. But it isnt sounding good.
    no they will not bolt up the 750's use three bolts on each cylinder to bolt the manifold up and the 785 head pipes are four bolt .

  7. #7
    Lake Mead Bum & BTLS Mark starflight's Avatar
    Join Date
    May 2007
    Location
    Boulder City, NV
    Posts
    3,364
    +1
    1
    Quote Originally Posted by ZOMGVTEK View Post
    So, they dont bolt to the exhaust on the jugs? Its just the question of if it will mechanically bolt onto the cyls. But it isnt sounding good.
    No they will not bolt up w/o modifying the manifolds, and cylinder exhaust port some.

    Oh yeah, I wasnt even thinkin about the 650/750 bolt pattern is different than the 780's.

  8. #8
    Grrr, so no tripples for me?

  9. #9

    Join Date
    Aug 2006
    Location
    Homer Glen Il.
    Posts
    8,704
    +1
    109
    Quote Originally Posted by ZOMGVTEK View Post
    Grrr, so no tripples for me?

    just get your cylinders ported and a dry pipe ,v force reeds and 44 carbs and a 785 cdi and it will help it out alot and still be reliable .

  10. #10
    Quote Originally Posted by 785 lugs View Post
    just get your cylinders ported and a dry pipe ,v force reeds and 44 carbs and a 785 cdi and it will help it out alot and still be reliable .
    Have the dry pipe and reeds, working on a 785 CDI...

    I dont think i would ever get the carbs, too expensive for minimal gain. With tripples the ski would be all around more badass, as well as faster.

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. thru hull fitting on sl750
    By skigolfnut in forum Polaris Open Discussion
    Replies: 4
    Last Post: 07-05-2009, 03:52 PM
  2. 99 slx what sponsons fit?
    By RedlineR6 in forum Polaris PWC Performance
    Replies: 3
    Last Post: 05-23-2009, 06:28 AM
  3. What will FIT??
    By bossd in forum Polaris How To & FAQs
    Replies: 5
    Last Post: 09-11-2008, 11:26 AM
  4. What jets fit the 38-44 mikuni?
    By KEYZBUM in forum Polaris Open Discussion
    Replies: 2
    Last Post: 08-01-2007, 07:02 PM
  5. This **** catch can, what the fittings called?
    By Shibby1485 in forum Sea Doo Open Discussion
    Replies: 53
    Last Post: 04-23-2006, 10:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •