Thread: SC stuck ?
09-17-2008, 07:21 PM #1
SC stuck ?
I got all three bolts out, im sure they're the correct bolts
the waterbox/jpipe are out, the hoses are out.
it won't budge, at all.
09-17-2008, 07:25 PM #2
Pull and twist..IF you have the right 3 bolts out she will come out..There are 2 O-rings that help seal it and the SC gear is still meshed with the drive gear in the motor..
09-17-2008, 07:27 PM #3
- Join Date
- Apr 2005
the 3 screws should have the same length, are you able to move your SC (turn right/left) ?
09-17-2008, 07:31 PM #4
- Join Date
- Aug 2005
- Jerry's guest bedroom
09-17-2008, 07:41 PM #5
09-17-2008, 07:56 PM #6
i cant move it at all,nothing is in its way and im 100% positive i took out the right bolts
i'd normally use a BFH but i dont want to mess anything up
09-17-2008, 08:21 PM #7
Wiggle it. Just a little bit. I said. Wiggle it. Just a little bit
09-17-2008, 08:24 PM #8
09-17-2008, 08:29 PM #9
All kidding aside. They can be a bitch. Ive seen a large piece of wood in the outlet of the SC and worked it back and forth and it came out.
09-17-2008, 08:31 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By 4-techscharger in forum 4-Tec PerformanceReplies: 64Last Post: 07-08-2007, 02:21 PM
By danny76 in forum Sea Doo Open DiscussionReplies: 3Last Post: 07-16-2006, 09:05 AM
By Vman in forum Sea Doo Open DiscussionReplies: 4Last Post: 07-03-2006, 07:54 AM
By Brutus in forum Yamaha PWC Performance (2-stroke)Replies: 17Last Post: 05-01-2006, 11:57 PM
By Rusty in forum Yamaha PWC Performance (2-stroke)Replies: 1Last Post: 02-24-2006, 07:23 PM