Results 1 to 8 of 8
  1. #1

    Join Date
    May 2006
    Location
    MIAMI
    Posts
    256
    +1
    1

    sized tripplepiper 1300bb

    i was out with somebuddies sized my number one cylinder.

    i over heated of all f------ things. =I ichecked everthing i had water presuure the pipes were pissing all three.any idea why i over heated ..

    was not leaning out , it over heated.. any ideas ..


  2. #2
    spdracr's Avatar
    Join Date
    Sep 2005
    Location
    Fort Lauderdale
    Posts
    422
    +1
    2
    Without knowing how your water is routed it would be hard for anybody to tell your what went wrong. When you install pipes you have to take the good with the bad.

  3. #3

    Join Date
    May 2006
    Location
    MIAMI
    Posts
    256
    +1
    1
    I wouldn't have it any other way.
    thanks anyways

  4. #4
    TRIPLE PIPES ARE 2-STROKE TURBOS allcool's Avatar
    Join Date
    Nov 2005
    Location
    s fl
    Posts
    414
    What makes you think it over heated ?

    There is a water log that all the inlet water hoses connect to, some logs have a screen in them...is screen plugged up ?

    Whats your piston wash and plugs look like ?

    allcool

  5. #5

    Join Date
    May 2006
    Location
    MIAMI
    Posts
    256
    +1
    1
    Overheat Alarm Came On Write When A Loss Power The Front Cylinder Was Very Hot The Center Was Hot But Not As Much As Front And Number 3 Was Cool To The Touch...

    Plugs Looked Good ... The One That Siezed Was Closed ..

  6. #6

    Join Date
    May 2006
    Location
    MIAMI
    Posts
    256
    +1
    1
    I Will Check This In A Few Days When Get To Bike.

  7. #7
    spdracr's Avatar
    Join Date
    Sep 2005
    Location
    Fort Lauderdale
    Posts
    422
    +1
    2
    Take pictures of the piston wash.

  8. #8

    Join Date
    May 2006
    Location
    MIAMI
    Posts
    256
    +1
    1
    Thank You

    I Will Have My Hands On It This Weekend Thank You

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What size bit and tap for dynotune gauge
    By excess in forum 4-Tec Performance
    Replies: 5
    Last Post: 06-30-2006, 06:10 PM
  2. Thermostat worm screw sizes
    By Kinchyle in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 06-27-2006, 08:34 PM
  3. Thread size on xspower?
    By Yuji in forum 4-Tec Performance
    Replies: 1
    Last Post: 06-01-2006, 12:12 PM
  4. Throttle Body bore size
    By HOSS in forum 4-Tec Performance
    Replies: 23
    Last Post: 05-09-2006, 12:13 PM
  5. V nozzle sizes
    By JD 1 in forum 4-Tec Performance
    Replies: 2
    Last Post: 02-06-2006, 09:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •