Results 1 to 5 of 5
  1. #1
    GPR_KID #42 Fabian_1's Avatar
    Join Date
    Sep 2007
    Location
    Cayman Islands
    Posts
    84

    Have Anybody Used A 11/14 Prop On A Xl1200 Limited

    YEH AM LOOKIN 2 SEE IF ANYBODY AS USE A 11/14 PROP ON A XL1200 LIMITED 2001 WOULD IT SLOW ME AND R WhAT


  2. #2
    They usually use a 12/18 or a 13/19 concord, and yes I would think you would loose a lot of top end with an 11/14.

  3. #3
    GPR_KID #42 Fabian_1's Avatar
    Join Date
    Sep 2007
    Location
    Cayman Islands
    Posts
    84

    k

    ok man thanks alot

  4. #4
    Donna didn't teach you how to search boy!!!!


    1: Engine RPM is too high or is exceeding manufacturers' recommendations at full throttle.
    1:Increase impeller pitch.

    2:Engine RPM is too low or not reaching its rated RPM at full throttle.
    2ecrease impeller pitch.

    3:High altitude operation.
    3ecrease impeller pitch.

    4:Cold weather operation.
    4:Increase impeller pitch.


    5:Top speed and performance under all conditions.
    5:Increase or decrease impeller pitch to reach the manufacturer's recommended RPM at full throttle


    did a quick search and this came to my eye

    http://greenhulk.net/forums/showthre...impeller+pitch

    search "impeller ptich" in the search bar

    that pitch seems good for holeshot don't know the results up top GL

  5. #5
    The 11/14 is for the XLT/GPR 800

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Anybody else using a VX prop on a GPR
    By LT1GMC in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 08-21-2014, 07:37 AM
  2. Anybody use Yamaha race cams add on stage 3?
    By Daxler in forum Yamaha PWC Performance (4-stroke)
    Replies: 13
    Last Post: 06-06-2011, 01:52 PM
  3. Jetting - Anybody using unported 1300 cylinders on a GP1200R?
    By philip_gpr in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 08-11-2006, 08:39 PM
  4. Anybody use the Adjust A Thrust on the 4-Tecs?
    By Pale Rider in forum 4-Tec Performance
    Replies: 6
    Last Post: 12-04-2005, 09:25 AM
  5. Has anybody used aftermarket sponsons on their RXT?
    By Phil in forum 4-Tec Performance
    Replies: 5
    Last Post: 08-21-2005, 08:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •