Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1

    What prop do you recommend for ...

    Edit: This ones been posted several times. Sorry for not searching better.


    RXP with a gibson exhaust, XS intercooler, riva intake, and soon 42lb injectors and a stage 3 wheel. I was thinking a Solas 15/20 4 blade or the Skat 15/19...

    let me know what you think.

    I get confused with the number/ratio... I just remember from past experience that a 4 blade yields more top end.. no?


  2. #2
    Quote Originally Posted by twelvesorbetter View Post
    RXP with a gibson exhaust, XS intercooler, riva intake, and soon 42lb injectors and a stage 3 wheel. I was thinking a Solas 14/17 4 blade...

    let me know what you think.

    I get confused with the number/ratio... I just remember from past experience that a 4 blade yields more top end.. no?
    15/20R. See how it runs then tweek it to get your RPM where they need to be.

    http://www.4-tecperformance.com/inde...products_id=12

  3. #3
    West Texas RXP skoepp's Avatar
    Join Date
    Oct 2007
    Location
    west texas
    Posts
    12,019
    +1
    149
    15/20R

  4. #4
    AKA "The Guppy" JeffTurbo601's Avatar
    Join Date
    May 2007
    Location
    Jacksonville, Florida
    Posts
    991
    Quote Originally Posted by skoepp View Post
    15/20
    +1

  5. #5
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    15/20R

  6. #6
    The ski's have taken a "backseat" to the Corvette DarthAWM's Avatar
    Join Date
    Nov 2007
    Location
    Odessa, TX
    Posts
    5,364
    Quote Originally Posted by skoepp View Post
    15/20R
    + 5 Its what you need for a Stage 2.75+ RXP the 14/17 is the Stage 1 prop for the GTXL/RXT the RXP jump right to the 14/19

  7. #7
    Do Work Son 05RXPnoob's Avatar
    Join Date
    Jul 2005
    Location
    Lake Chickamauga/ Chattanooga TN
    Posts
    958
    Quote Originally Posted by twelvesorbetter View Post
    RXP with a gibson exhaust, XS intercooler, riva intake, and soon 42lb injectors and a stage 3 wheel. I was thinking a Solas 14/17 4 blade...
    I running all you have listed, my 2 props: Solas 15/20 4blade and Skat 15/19 3blade. 4blade will have better top end, but 3 blade will pull harder.

    If your interested in the 3blade Skat route, I have one for sale, low low hours new condition.

    Jay

  8. #8
    I care more about thrust than an extra mile per hour.

  9. #9
    Quote Originally Posted by twelvesorbetter View Post
    I care more about thrust than an extra mile per hour.
    Then get a 15/19R Skat 3 blade. Buy Jay's.

  10. #10
    How much different is the thrust with that 3-blade? Id be happier with something that shot me out of the water a little harder off a tugboat wake than something that gains me 1 more mph.

    if there were mods that made me come out of the water like a surface-to-air missle, id be all over it. lol thats more fun [to me] than going 80mph.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. What RRFPR do you recommend
    By Martin RXT-X in forum 4-Tec Performance
    Replies: 15
    Last Post: 09-11-2011, 09:50 PM
  2. what do you recommend for bolt ons for speed?
    By HYNES in forum Yamaha PWC Performance (2-stroke)
    Replies: 6
    Last Post: 07-12-2010, 07:53 PM
  3. What Mods Do You Recommend?
    By Supercowcc in forum 4-Tec Performance
    Replies: 3
    Last Post: 01-26-2010, 07:20 PM
  4. What ski do you recommend?
    By use2vtec in forum Open Discussion
    Replies: 7
    Last Post: 11-13-2009, 09:49 PM
  5. What Prop Do you recomend? my Rpms arent there?
    By Sosa62 in forum 4-Tec Performance
    Replies: 3
    Last Post: 09-23-2007, 08:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •