Results 1 to 7 of 7
  1. #1

    Join Date
    Feb 2006
    Location
    TN
    Posts
    12

    Will I be getting enough air?

    ok. I have a 05 1300 that is in the process of becoming a BB with porting. I also have reeds. currently my only mod for air is the cowl opening which has the hose that runs down to the airbox. Will i need to put the air filters on it for the most possible performance. Thanks


  2. #2

    Join Date
    Nov 2005
    Location
    All over
    Posts
    716
    I would look into the R&D race air intake. I picked it up and I loved the results!!! It's SOOOOO much better then the power filter!!! It will really open your ski and amke sure it has all the air it needs. Just make sure you have an EFI controller! You will need to give it some fule with all that air...

    Remeber a balanced diet is the best!

  3. #3

    Join Date
    Feb 2006
    Location
    TN
    Posts
    12
    Thats what I figured. Thanks RXPKiller. Speaking of the efi. What settings do you guys think I should start off with? Other than having a BB with porting and reeds, I also will have Fercho's version of the jetworks mod. Thanks!

  4. #4

    Join Date
    Nov 2005
    Location
    All over
    Posts
    716
    Quote Originally Posted by cr_mx21
    Thats what I figured. Thanks RXPKiller. Speaking of the efi. What settings do you guys think I should start off with? Other than having a BB with porting and reeds, I also will have Fercho's version of the jetworks mod. Thanks!
    One thing when tuning the Jetworks mod is I had to turn it out a bit so that more water would flow at high RPMs. I lost RMPs on top due to a loss of back presure.

    MAKE SURE YOU HAVE A TACH!!! I'm sure everyone will agree with that!

  5. #5
    ABBOTT's Avatar
    Join Date
    Jul 2005
    Location
    Birmingham, AL / Lay Lake
    Posts
    3,736
    +1
    96
    Quote Originally Posted by cr_mx21
    Thats what I figured. Thanks RXPKiller. Speaking of the efi. What settings do you guys think I should start off with? Other than having a BB with porting and reeds, I also will have Fercho's version of the jetworks mod. Thanks!
    try 6-6-6-9 and remember that every ski will be different. I say these settings because you are ported (David Hernandez, if your reading this, I gave you 6-6-2-8 because you have no porting and do not require as much fuel on top-end)

  6. #6

    Join Date
    Feb 2006
    Location
    TN
    Posts
    12
    Ok. Thanks for the info guys!

  7. #7

    Join Date
    Apr 2006
    Location
    panama city beach 'fl
    Posts
    1,846
    +1
    9
    I would still mod the hood and bucket

    later cdpcb

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. R5WaterXRacing will be LIVE on AIR 05/21/08....
    By R5WaterXRacing in forum Race Events and News
    Replies: 0
    Last Post: 05-16-2008, 07:39 PM
  2. Might be getting this XP!
    By Cyclone268 in forum 2-Stroke Performance
    Replies: 20
    Last Post: 02-04-2007, 04:30 AM
  3. How will reliability be affected...?
    By GeoRXT in forum Sea Doo Open Discussion
    Replies: 2
    Last Post: 10-19-2006, 10:28 AM
  4. Will I be needing Riva control EFI 1300 with this mods..
    By ExciterGPR in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 07-02-2006, 02:14 PM
  5. WILL THERE BE A MUDBUG JERRY?
    By peteshauling in forum 4-Tec Performance
    Replies: 3
    Last Post: 09-01-2005, 07:35 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •