Thread: Give me your opinion???
10-13-2008, 09:30 PM #1
Give me your opinion???
Just wanna know if what I am running in my ski if I can run a 15/22 prop?? Hear they will run on the X ski's and I think I am over them ( since they can't catch me the way I am ) Wanna know all your opinions...tweek it or go with the 15/22...Any help would be awsome cause the hole prop thing has got me a little lost to tell you the truth...lol....Thanks
10-13-2008, 09:33 PM #2
I think you are better off with the 15/20
10-13-2008, 09:36 PM #3
10-13-2008, 09:40 PM #4
Most people don't understand how big the 15-22 is. Or for that the X boat runs a 87mm nozzle to be able to run that big prop. DOG it down with a Stock RXP nozzle and you will see how big it is.
Stick with a 15-20 until you get a big dog SCer.
10-13-2008, 10:06 PM #5
Side note: We noticed at the World Finals that Solas has released a 15/21... maybe others knew this but it was the first I had seen of it. Might be a great compromise for some of us.
BTW... dpoole, I agree, the 15/20 is the best choice for your current set-up.
10-13-2008, 10:15 PM #6
Jeff, can you tell me any more about the 15/21. Was it something they were advertising or something.
So when would you think a 15/22 would be a better prop for a high boost RXP over a 15/20 heavily pitched?
I would have to go back and check my setup but i think I ran stock 15/22 with 84 ring not to long ago and then switched back over to the 15/20 +1.4 -1.6 mm with 82 ring with a little more top end.
I am just wondering how far i can go on a 15/20 with pitch added before it would be best to change props. For instance it seems that on stock ecu it seems most have to add quite a bit of pitch on a 15/20 as we increase the boost. Compared to running at 8,500 rpm + most seem to be closer to stock pitch or even some taken out to get perfered rpm.
I guess i am wondering on stock ecu and rude2 if it would be best to bend 15/20 to the max or go different prop.
sorry to hijack dpoole5074.
To your answer per my findings i would stay with 15/20. It has done well for my ski with Rude1 but I am not sure as boost increases more with stock ecu.
10-13-2008, 10:25 PM #7
I grabbed a catalog on my way out... let me go see if it is listed.
10-13-2008, 10:49 PM #8
just wondering what a big dog SC is according to a previous reply>?? Running a X charger and thought that was a good SC....Anyway just wondering....Thanks
10-13-2008, 10:55 PM #9
I cant speak for Austin but maybe can look at like this.
Up to this point Rude1, bkit, or c kit was the big dog and a 15/20 has proven to work with those setups.
I would have to assume that Austin is refering to the un know big scs that are out there now.
I think know there are alot of unknows about all the new scs and what setups will be perfect.
10-14-2008, 04:25 PM #10
Well , really i donīt know whatīs the difference between 15/20 and 15/22 but i did a test with both impellers in my GTI Turbo, and i had better results with 15/20. At 8.200RPM the top speed is the same but when the engine go to 8.800 with 15/20 the speed increase but with 15/22 the top speed was the same at 8200 than 8800. I donīt know why but i supouse that 15/22 was made for "X" tunnel pumpo desing.
I get better results with 15/20, more acceleration and more top speed...
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Boglin in forum 2-Stroke PerformanceReplies: 2Last Post: 08-03-2011, 07:18 AM
By Pale Rider in forum Yamaha Open DiscussionReplies: 30Last Post: 07-30-2007, 01:17 AM
By dav_dman in forum Honda PerformanceReplies: 5Last Post: 06-16-2007, 12:21 PM
By soda bay in forum 4-Tec PerformanceReplies: 3Last Post: 06-12-2007, 12:20 AM
By jgimlet in forum Sea Doo Open DiscussionReplies: 2Last Post: 07-31-2006, 06:18 PM