Thread: change, adjust bunks....
10-19-2008, 04:11 PM #1
change, adjust bunks....
any suggestions on how to adjust and replace bunks on my trailer? but here's the catch....i dont want to go to the ramp and keep reloading my ski. can i jack the ski up with a jack? any ideas?
10-19-2008, 04:16 PM #2
- Join Date
- Oct 2005
use suitable length 2X4`s vertically up inside under the rub rail by the corners in rear and one up front to lift one side of the ski at a time, you`ll need 2 floor jacks. def protect the hull with carpet or rags wrapped around the wood...
go slow and easy, lift evenly and you should be fine...
I had an extra set of use carpeted bunks that i slid under the bow when I did my adjustments to the trailer with ski sitting on it...good luck
10-19-2008, 05:07 PM #3
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Sunfunzoom in forum Sea Doo How To & FAQsReplies: 277Last Post: 04-18-2016, 10:37 PM
By wave15stx in forum Yamaha PWC Performance (4-stroke)Replies: 3Last Post: 06-13-2009, 08:55 PM
By soccerkikr in forum Polaris How To & FAQsReplies: 6Last Post: 05-31-2009, 03:22 PM
By sleaves in forum Towing and TrailersReplies: 0Last Post: 10-03-2008, 01:31 PM
By bling bling in forum 4-Tec PerformanceReplies: 14Last Post: 05-03-2005, 06:55 PM