Results 1 to 2 of 2

Thread: 87 mm question

  1. #1
    just GOT TO DO IT! great lakes gpr 1200's Avatar
    Join Date
    May 2006
    muskegon michigan

    87 mm question

    I'm looking into having Lowell do a 87mm BB kit for me.. I have this for jetting now,
    1.5 needle valve
    95 gram spring
    120 main jet
    95 pilot jet
    I am at 500 ft above sea level mostly high 70* weather. half turn out on lows 1.5 turns out on highs.. Do ya think I need to rejet ?
    Of course porting is in the quote.

  2. #2
    HopatcongGPR's Avatar
    Join Date
    Feb 2006
    New Jersey
    imo, you should start with a 125m and a 115 pilot with the stock carbs. you will probably be ok with a 120 main and a 110 pilot, but i would start a little fat and monitor piston wash and rpm to be sure.

    hope that helps.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. RXT handling question
    By MPower in forum 4-Tec Performance
    Replies: 5
    Last Post: 08-11-2009, 10:04 AM
  2. 158 Thermostat question...
    By rx4pain in forum 4-Tec Performance
    Replies: 34
    Last Post: 11-21-2008, 10:36 PM
  3. Oil Level question , this thing mixes me up :(
    By rxp_boy in forum 4-Tec Performance
    Replies: 4
    Last Post: 05-23-2005, 10:03 AM
  4. Question for the Hulk
    By Therock in forum 4-Tec Performance
    Replies: 3
    Last Post: 05-20-2005, 07:13 AM
  5. RXP VTS Question
    By 1FastTrespiper in forum 4-Tec Performance
    Replies: 4
    Last Post: 05-08-2005, 10:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts