Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 25
  1. #1

    Join Date
    Jul 2008
    Location
    ENGLAND
    Posts
    605

    intercooler fitting

    got an 07 rxp with riva block off and riva through hull exhaust allready fitted,can i fit the fizzle itercooler,or should i stick to the riva gen 2,the price difference is not an issue,fitting and performance are many thanks.VERY IMPORTANT, I RIDE 100% IN THE SEA,muddy puddles dont do it for me so corrosin issues on these coolers are paramount.


  2. #2
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    The riva IC requires removal of your OPAS

  3. #3
    Banned User
    Join Date
    Dec 2006
    Location
    Crest Hill, IL
    Posts
    9,512
    +1
    215
    Quote Originally Posted by bigdaddyRXP View Post
    The riva IC requires removal of your OPAS

    ????????????

  4. #4

    Join Date
    Jul 2008
    Location
    ENGLAND
    Posts
    605
    ye,thats been taken out,bars,rubbers,and paddles,ect,then i fitted block off plates.

  5. #5
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    Quote Originally Posted by Danny View Post
    ????????????
    From the riva IC description:


    Power Cooler Kit contains all necessary mounting hardware and installation instructions. Requires use of RIVA Rear Exhaust Kit and RIVA O.P.A.S. Block-off Kit (Performance or Pro-Series).

  6. #6
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    Quote Originally Posted by MARK_LEGG View Post
    ye,thats been taken out,bars,rubbers,and paddles,ect,then i fitted block off plates.
    Ok... Thought you meant IC block off

  7. #7
    Banned User
    Join Date
    Dec 2006
    Location
    Crest Hill, IL
    Posts
    9,512
    +1
    215
    Quote Originally Posted by bigdaddyRXP View Post
    From the riva IC description:


    Power Cooler Kit contains all necessary mounting hardware and installation instructions. Requires use of RIVA Rear Exhaust Kit and RIVA O.P.A.S. Block-off Kit (Performance or Pro-Series).


    In order to use their IC, you will need to remove the resonator...which makes you do 1 of 2 options...1) snake the OEM hose and use a pipe to connect to the OEM outlet, or 2) go with a rear exhaust...

    If you go with a rear exhaust, the Riva setup is designed to be used with the OPAS removed. With some work, you can mount the outlet differently (not the suggested position) to allow the OPAS to still be used.

    Either the Riva setup or Fizzle setup can still use the OEM exhaust outlet, just have to make it work...

  8. #8

    Join Date
    Jul 2008
    Location
    ENGLAND
    Posts
    605
    no,sorry my mistake,it was the opas steering that i removed,blocked it off,and now im looking to put in an intercooler,looks tricky to do,but im gona have a go at it,in edging towards the riva gen2 because i can fit the blow off valve as well,but im gona see what feed back i get.

  9. #9
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    Quote Originally Posted by Danny View Post
    In order to use their IC, you will need to remove the resonator...which makes you do 1 of 2 options...1) snake the OEM hose and use a pipe to connect to the OEM outlet, or 2) go with a rear exhaust...

    If you go with a rear exhaust, the Riva setup is designed to be used with the OPAS removed. With some work, you can mount the outlet differently (not the suggested position) to allow the OPAS to still be used.

    Either the Riva setup or Fizzle setup can still use the OEM exhaust outlet, just have to make it work...
    I'm with you here I'm going to install my riva water box without removing my OPAS

  10. #10
    Banned User
    Join Date
    Dec 2006
    Location
    Crest Hill, IL
    Posts
    9,512
    +1
    215
    Quote Originally Posted by MARK_LEGG View Post
    no,sorry my mistake,it was the opas steering that i removed,blocked it off,and now im looking to put in an intercooler,looks tricky to do,but im gona have a go at it,in edging towards the riva gen2 because i can fit the blow off valve as well,but im gona see what feed back i get.

    See if any of these posts help ya...

    http://greenhulk.net/forums/showthread.php?t=68684

    http://greenhulk.net/forums/showthread.php?t=46959

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB standard intercooler exit by-pass fitting
    By db2540 in forum Yamaha Classifieds
    Replies: 0
    Last Post: 06-15-2010, 06:15 AM
  2. Removing fittings from Intercooler
    By RobbieMWD in forum 4-Tec Performance
    Replies: 0
    Last Post: 05-18-2009, 07:54 PM
  3. Intercooler water fittings???
    By grantuk in forum 4-Tec Performance
    Replies: 9
    Last Post: 03-10-2009, 04:47 PM
  4. 3/4 inch waterline 90deg fitting for xs intercooler
    By rxpsalazar in forum 4-Tec Performance
    Replies: 14
    Last Post: 04-08-2008, 05:57 PM
  5. Can an intercooler be fitted to a non IC ski?
    By Gappa in forum 4-Tec Performance
    Replies: 25
    Last Post: 11-01-2007, 11:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •