Thread: 03 Seadoo XPDI Avaliable Parts?
10-23-2008, 12:31 PM #1
03 Seadoo XPDI Avaliable Parts?
Does anyone know where i could find ...
Intermedite harness 278001880
Back harness 278001878
ECM Module 278001895
Boat is sitting at the dealership waiting on these parts.
The dealership can't find these parts so its up to me.
10-23-2008, 01:00 PM #2
10-23-2008, 01:27 PM #3
Yes i called them.
I just tried Ronnies again and they can't help me
Nobody has these parts.
Wiring has to be replaced due to a melting issue.
Warranty is covering it and the bill is exceeding $4800 with labor.
I got sick and tired of seadoo dealers around here so i took it with me to vancouver and the machine is at a great shop which they seem to understand the DI ...I Told them to try to warranty as much electrical as they can and i'll pay for the rest.
Every peice of electrical on this boat is getting replaced.
And i mean everything!
If this doesn't work im going to take a baseball bat to it and enjoy every minute of it
10-26-2008, 09:46 AM #4
- Join Date
- Nov 2007
In the amount of time its taking cant you just replace the burned up wires?or did it get plugs also even if it did you can buy male and female plug ends .I know buying a whole new harness is much easier ,try john at Jetski haven or a few of the other salvage shops for a used set if you cant find new!!!JMHO>Marvin
10-27-2008, 01:03 PM #5
I have tried every online place i can find.
I have found the front harness and the rear one which are already ordered and due in tommarow.
The middle harness i'll just leave..There all new wiring already but the dealer wants to completly start over..So ya.
Machine might be running tommarow.
#4 MPEM tommarow...hope it works.
10-27-2008, 01:14 PM #6
10-27-2008, 06:24 PM #7
Which dealer are you at in Vancouver ?
10-28-2008, 12:42 AM #8
- Join Date
- Jul 2005
"The middle harness i'll just leave..There all new wiring already but the dealer wants to completly start over..So ya. "
Your new dealer sounds about as bad all the other ones you took it too, reading on other boards... the new guy is just another parts swapper and that will always be a sign that they don't know what the heck. That being said I am sorry you have this huge problem.
10-28-2008, 06:53 PM #9
10-29-2008, 02:39 PM #10
All the parts have already been ordered.
#4 MPEM cooked as soon as they installed it.
Wiring is the problem.
Question: On a 03 xpdi if the trim is all the way down is it normal for the boat to try to dive under water??? The nose goes under water like a foot and then flips you off. And the machine leans to one side really bad..like your going to fall off. I just find that to be somewhat interesting seadoo would sell such a machine.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By 2blue in forum 2-Stroke PerformanceReplies: 1Last Post: 08-30-2009, 07:01 PM
By water worx in forum Sea Doo ClassifiedsReplies: 16Last Post: 07-13-2009, 10:12 PM
By kenshin89 in forum Sea Doo ClassifiedsReplies: 15Last Post: 03-30-2009, 10:14 AM
By MILLER PHASE 3 1050 in forum Sea Doo ClassifiedsReplies: 3Last Post: 07-08-2008, 03:17 PM
By monsoonmadness in forum Sea Doo ClassifiedsReplies: 3Last Post: 06-12-2008, 04:59 PM