Thread: WTB....GPR carbs
10-26-2008, 04:27 PM #1
- Join Date
- Jul 2008
- Chesterfield Virginia USA ~ On the James River~
I need 3 good rebuildable OEM carbs. for my 2000 GPR
Low and high mixture screws need to turn.
10-26-2008, 04:29 PM #2
I have a couple sets freshly rebuilt. Can jet to spec if needed.
10-26-2008, 04:39 PM #3
yep and I have a set that need a rebuild.
10-26-2008, 04:40 PM #4
10-26-2008, 05:00 PM #5
I am sure Joe's (Crashhard) will be cheaper if you can do the rebuild yourself and have kits already.
10-26-2008, 07:30 PM #6
get them from o-side he has nice stuff!!
I drilled the tampers and the lows are locked. Its a shame because the carbs look good from the outside. Tried a impact driver that i grinded the tip down to fit, turned a quarter turn but didnt loosen up enough for a regular screw driver and stripped alittle.
Will let these go cheap is anyone wants them, some corrosion on the pump side but cleaned up with carb clean. Normal it seems for these carbs. and good luck with the speed adjustments.Thanks Joe
10-26-2008, 08:26 PM #7
- Join Date
- Jul 2006
- Sacramento, California, United States
10-26-2008, 08:45 PM #8
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By kham383 in forum Yamaha ClassifiedsReplies: 5Last Post: 08-17-2008, 07:40 AM
By LS2000 Cop in forum Yamaha PWC Performance (2-stroke)Replies: 2Last Post: 10-09-2007, 07:04 AM
By LT1GMC in forum Yamaha PWC Performance (2-stroke)Replies: 8Last Post: 10-02-2007, 01:08 AM
By beerdart in forum Yamaha PWC Performance (2-stroke)Replies: 6Last Post: 08-16-2007, 09:26 PM
By sic fish in forum Yamaha How To & FAQsReplies: 3Last Post: 07-08-2007, 08:32 PM