Results 1 to 6 of 6
  1. #1
    txgp1300r's Avatar
    Join Date
    Apr 2006
    Location
    Dallas , Texas
    Posts
    3,381
    +1
    165

    whats a good efi set up for my ski ?

    Im running the numbers below on efi do they look ok?


  2. #2

    Join Date
    Nov 2005
    Location
    All over
    Posts
    716
    the 9 is a bit high for the mid (yellow) dial. I would drop it to about 5-6 with the mods you got.

    ALSO:

    I have an '05 (same baot as yours) I ran the top to lean with about the same setup as you. I ran it at about 1.5 and now I have to buy new pistons. It worth it to run a PINCH rich on the top and save the expense of new parts!!! or major repairs!!! I would tune it until you have the peek RPMs on top and then richen it up by .5 or so! You'll lose about 30 RPMs but you'll gain reliablity!!!

    Trust me it's worth it!!!

    LEAN IS BAAAAAAAAAAAAAAAADDDDDDDDDDDDDDDDDDDD!!!!!!!

  3. #3
    WATER WOODY's Avatar
    Join Date
    Aug 2005
    Location
    Minden, Nevada, United States
    Posts
    10,664
    +1
    11
    Yeah,so is putting the DF 3 reeds in with dry gaskets!

  4. #4
    ABBOTT's Avatar
    Join Date
    Jul 2005
    Location
    Birmingham, AL / Lay Lake
    Posts
    3,736
    +1
    96
    try 6-6-2-9 - you don't have porting (that i can see) so don't worry so much about running the red dial low. Try 6-6-2-9 and also 6-6-1-9 for those mods.

    if you had porting, then i would try 6-6-6-9 (with porting, you def do not want to get below 5 on the red dial because you need the extra fuel on top to stay cool.

    Two things are keeping your engine cool - water and fuel.

    Good luck!

  5. #5

    Join Date
    Nov 2005
    Location
    All over
    Posts
    716
    Quote Originally Posted by WATER WOODY
    Yeah,so is putting the DF 3 reeds in with dry gaskets!
    What kind of MORON would do something SOOOOOOOOOOOOOOOO dumb??? I mean come on, that guy must be a dumb ass!!! Woody tell me his name and lets all make fun of him


    On second thought, you never know... ...he may have been trying something new??? Maybe???

    I guess I shouldn't tell you about that latest thing I did! You might go and tell everyone on this damn forum. I will say someone's wife REALLY liked it!!!

    She want's me to teach it to you. LOL

  6. #6
    txgp1300r's Avatar
    Join Date
    Apr 2006
    Location
    Dallas , Texas
    Posts
    3,381
    +1
    165
    thanks abbott...will try the settings

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Whats everyones best set up for SC washers/springs
    By Spooln3000 in forum 4-Tec Performance
    Replies: 7
    Last Post: 06-01-2016, 08:51 AM
  2. Replies: 5
    Last Post: 06-27-2014, 01:31 PM
  3. What's the best ocean riding set up for the FZR?
    By Jmfmk3 in forum Yamaha PWC Performance (4-stroke)
    Replies: 20
    Last Post: 07-08-2013, 09:04 AM
  4. Replies: 1
    Last Post: 03-13-2012, 11:18 AM
  5. GTX Guys: What is best UMI set-up?
    By Pale Rider in forum Sea Doo Open Discussion
    Replies: 10
    Last Post: 08-10-2006, 06:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •