Results 1 to 5 of 5
  1. #1
    SpeedFreak
    Join Date
    Jul 2008
    Location
    Fond du lac Wisconsin
    Posts
    220

    Bilge pump bracket spacing gpr

    I need the distance from outside to outside of the intermediate shaft bolt holes so I can mount the bracket there. its a 2001 gp1200r


  2. #2
    SpeedFreak
    Join Date
    Jul 2008
    Location
    Fond du lac Wisconsin
    Posts
    220
    Or whats center to center on those 2 bolts?

  3. #3
    mrbtd's Avatar
    Join Date
    Jul 2005
    Location
    Lindenhurst, Illinois, United States
    Posts
    4,309
    +1
    2
    As low as you can. IN fact it may be better to just put the pump UNDER the intermediate shaft. It is at the lowest point then.

  4. #4
    I agree with that . I use 3m 5200 to mount the bases I have never lost one yet! just sand the pump base and clean the hull , use fast cure 5200 or 4200 Anticipate the way you want it to face stick it in and let it sit for a day . then assemble the pump and snap it on the base

  5. #5
    SpeedFreak
    Join Date
    Jul 2008
    Location
    Fond du lac Wisconsin
    Posts
    220
    Riva used to make a bracket to mount under the shaft but no longer does. I found a template of it but need to know the hole spacing on it that mounts to the intermediate shaft housing. Does anyone know the distance between the holes?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. riva bilge pump bracket pattern
    By SUCKMYWAKE in forum Yamaha PWC Performance (2-stroke)
    Replies: 36
    Last Post: 04-20-2016, 09:11 PM
  2. WTB Looking for a Riva bilge pump bracket for a 02 GP1200R for sale
    By Johnny5 in forum Yamaha Classifieds
    Replies: 4
    Last Post: 08-03-2010, 02:43 PM
  3. FS Riva bilge pump bracket
    By WFO in forum Yamaha Classifieds
    Replies: 3
    Last Post: 10-23-2009, 08:08 PM
  4. anyone upgrade/change their bilge pump system on gprs?
    By MJE in forum Yamaha PWC Performance (2-stroke)
    Replies: 11
    Last Post: 07-08-2009, 08:53 PM
  5. bilge pump bracket
    By sic fish in forum Yamaha How To & FAQs
    Replies: 2
    Last Post: 06-18-2007, 02:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •