Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14
  1. #1
    CC Racer kenshin89's Avatar
    Join Date
    May 2005
    Location
    VA
    Posts
    2,902
    +1
    2

    2004 Sea-Doo RXP Located in VA

    2004 RXP
    82 Hours (Stock ECU) and about 58 with the RR Stock Class ECU
    Custom Pearl Corvette White Paint job
    Riva Intake Grate
    Riva Power Filter Air Intake
    Riva Heavy Duty SC Clutch Washers
    Solas 14/19 Impeller
    UMI Finger Throttle + Extended Stock Bars & ODI Grips
    Riva Performance OPAS Block Offs
    Hydro-Turf Mat Kit & Side lifters
    Modified Stock Rideplate with Race Legal Skegs, a 1" extension & rideplate holes filled
    RXP-X Seat
    The Stock SC was rebuild last spring, but was never put on a ski since I was using an aftermarket SC.
    Trimmed Reverse Bucket
    '04 Cover
    Load Rite Single Trailer

    Had it out last weekend since taking off a lot of the performance parts.
    Air was about 70F and water temp felt like it was in the 60s. Really windy out so I couldn't find a good calm spot to do runs. I did manage to pull off a 68.8 and a 70.0. Ski ran good from what I could tell and rpms were 8100-8150 with no cavitation off the line.

    Its Located in Mineral, VA on Lake Anna. Zip code is 23117

    I'd like to get between $5,500-$6,000

    If you have any questions feel free to post or pm me.


  2. #2
    CC Racer kenshin89's Avatar
    Join Date
    May 2005
    Location
    VA
    Posts
    2,902
    +1
    2

    Pictures

    Pictures

  3. #3
    CC Racer kenshin89's Avatar
    Join Date
    May 2005
    Location
    VA
    Posts
    2,902
    +1
    2

    Pictures

    More Pictures

  4. #4
    CC Racer kenshin89's Avatar
    Join Date
    May 2005
    Location
    VA
    Posts
    2,902
    +1
    2

    Pictures

    & More

  5. #5
    CC Racer kenshin89's Avatar
    Join Date
    May 2005
    Location
    VA
    Posts
    2,902
    +1
    2

    Pictures

    Last batch of pictures

  6. #6
    hot color. free bump.

  7. #7
    CC Racer kenshin89's Avatar
    Join Date
    May 2005
    Location
    VA
    Posts
    2,902
    +1
    2
    Thanks.

  8. #8
    Greenhulk Grasshopah (DRC) HallPass's Avatar
    Join Date
    Jun 2007
    Location
    Kansas
    Posts
    5,587
    +1
    2
    how'd you get the bottom of the hull looking the way it does?

  9. #9
    CC Racer kenshin89's Avatar
    Join Date
    May 2005
    Location
    VA
    Posts
    2,902
    +1
    2
    Quote Originally Posted by HallPass View Post
    how'd you get the bottom of the hull looking the way it does?
    It's from the ski being slid on and off a beach dolly at the races. Other than the scuffs you see everything else with the hull is fine. No spider cracks or chips out of the gelcoat.

  10. #10
    CC Racer kenshin89's Avatar
    Join Date
    May 2005
    Location
    VA
    Posts
    2,902
    +1
    2
    Quote Originally Posted by duane View Post
    What kind of skegs are on the ride plate? How was it done?
    Ride plate and skegs were done by Mitch Newlin. All I know is that he epoxied them then welded both ends. I'd ask him just to make sure.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS Misc 2004 Sea Doo RXP Parts
    By kenshin89 in forum Sea Doo Classifieds
    Replies: 30
    Last Post: 07-03-2011, 10:36 AM
  2. FS 2004 Sea Doo RXP in TX $5,000
    By neversatisfiedmotorsports in forum Sea Doo 4Tec Skis
    Replies: 0
    Last Post: 09-25-2009, 06:23 PM
  3. 2 2004 Sea Doo RXP'S
    By 20rxp04 in forum Sea Doo 4Tec Skis
    Replies: 5
    Last Post: 01-13-2009, 08:51 PM
  4. FS: 2004 Sea Doo RXP
    By foxrace4 in forum Sea Doo Classifieds
    Replies: 0
    Last Post: 10-01-2008, 09:08 PM
  5. Replies: 6
    Last Post: 08-25-2007, 03:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •