Results 1 to 3 of 3
  1. #1
    Old Ski Insanity w/rpm500's Avatar
    Join Date
    Aug 2005
    Crystal River Fl

    how about a 1200 pump???

    wouldnt one of these be cool in a 155mm for old school yami applications..

    larger image

    larger image
    Introducing the most revolutionary pump component ever released for the Kawasaki stand ups. We have turned our dream into reality by designing a component that transforms the inefficient OEM pump into a high performance race pump. Over two years of development has gone into this design and literally hundreds of prototypes have been tested before we settled on this configuration. We have increased the hub diameter of the OEM pump, which creates an increase in pump pressure keeping the pump "loaded" in rough water conditions. The increased efficiency adds amazing acceleration, improved handling and top speed. The Super Pump Cone is designed to be used with the OEM, Solas Dynafly, or C-75 Skat-Trak impellers in standard, or a 5mm set back. Installation is as simple as changing an impeller and can be performed with standard tools. Fits '92-'05 Kawasaki 750/800 stand ups.
    *Due to the demands of Pro Racing we have redesigned our Kawasaki Super Pump Cone to increase the strength and offer our riders with the option to "tune" the pump for their particular set up or water conditions. Included with our "Pro" kit is the Super Pump Cone insert, a tail cone base that seals the pump and three different length tail cone tips. The tail cone tips can be changed by simply removing one M6 bolt and replacing the tip with a different length to optimize your impeller and nozzle combination. The short cone works well for Freestyle, Freeride and tight Closed Courses, while the medium and long tail cone works excellent for rough water hook up and amazing top speed.

  2. #2
    vomitspot's Avatar
    Join Date
    Apr 2006
    mobile alabama
    i have one in my sxr
    i call it my poors mans magnum

  3. #3
    cfgp927's Avatar
    Join Date
    Dec 2005
    Warsaw, Missouri
    they make one for the 144mm pump and I'm pretty sure the center section of both the 144 and 155 pumps are the same....I was going to try one, just haven't stepped up to the plate to buy one.....

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. How about a V6 In A Pro.
    By beerdart in forum Polaris PWC Performance
    Replies: 20
    Last Post: 09-25-2006, 09:46 AM
  2. How about 5mm stroked, 87mm pistons 66v?
    By Pistonwash in forum Yamaha PWC Performance (2-stroke)
    Replies: 9
    Last Post: 07-27-2006, 08:20 AM
  3. How about a Dealer Section
    By Sunfunzoom in forum Sea Doo Open Discussion
    Replies: 8
    Last Post: 04-23-2006, 08:57 AM
  4. How about a Solas 15/20R for my mods...?
    By GeoRXT in forum 4-Tec Performance
    Replies: 11
    Last Post: 04-03-2006, 11:31 PM
  5. How about a Member Ski's thread...?
    By 05RXPnoob in forum Sea Doo Open Discussion
    Replies: 0
    Last Post: 08-12-2005, 11:27 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts