Thread: Igni-Power FAQ
12-10-2008, 08:41 PM #1
Lets centralize work around the Igni-power ignition programmable igniton. Files, techniques, require parts, use with turbo vs sc, etc...
12-10-2008, 08:53 PM #2
i think it would help tremendously sell a few kits if there were more info to tune from and help with the set up and overall install!
12-10-2008, 09:04 PM #3
The use of an air fuel ratio gauge is mandatory for tuning and i also recommend the optional EGT's that come as an option to the Igni Power system.
This is the map i use on my turbo GPRXP. up to 24 psi boost, 82 lb hr injectors, RRFPR set at 50 psi base pressure.
FYI! If you run 82 lb hr injectors you will have to change the fuse in the igni power wire harness to a 15 amp fuse. If you don't change it you will blow the fuse.
12-10-2008, 09:08 PM #4
Here's a map to use 3 63 lb hr injectors with a Rude Charger. Stock fuse works fine with the 63's.
12-10-2008, 09:11 PM #5
Here is a map for a Rude Charger using 6 stock sized injectors. Stock fuse is okay.
12-10-2008, 09:13 PM #6
What mods are needed?
Idle air valve mod.
Turbo needs an adaptor for the oil temp sensor.
Mounting plate for electronics.
Suggesting wiring routing?
Schematics if anyone has them.
12-10-2008, 09:14 PM #7
- Join Date
- Apr 2005
full IGNI POWER instruction
12-10-2008, 09:15 PM #8
12-10-2008, 09:17 PM #9
12-11-2008, 02:12 AM #10
- Join Date
- Feb 2008
- Massa Italy
somebody has avaible
igni power map for this set up
3 Injectors 60 lbs
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Hydrotoys in forum 4-Tec PerformanceReplies: 35Last Post: 11-01-2009, 01:07 PM
By JD 1 in forum Sea Doo ClassifiedsReplies: 6Last Post: 10-16-2008, 06:03 PM
By theskiclinic in forum 4-Tec PerformanceReplies: 2Last Post: 04-15-2008, 03:36 PM
By NOTAM in forum 4-Tec PerformanceReplies: 7Last Post: 04-03-2008, 12:38 AM