Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1
    GDM's Avatar
    Join Date
    Apr 2007
    Location
    Ahead Of You
    Posts
    389

    best top end prop for my 2007 ultra 250

    .

    i have an 07 ultra 250 and the prop is shot

    which prop is the best for top end ?

    last time i checked , it seems like the stock 07 prop was the way to go , but is there any new news/findings on the best top end prop ?

    btw i did a search and couldnt find the answer

    thanks in advance

    .


  2. #2
    Take the time to smile sirbreaksalot's Avatar
    Join Date
    Jun 2007
    Location
    Brisvegas
    Posts
    4,157
    +1
    598
    Quote Originally Posted by GDM View Post
    .

    i have an 07 ultra 250 and the prop is shot

    which prop is the best for top end ?

    last time i checked , it seems like the stock 07 prop was the way to go , but is there any new news/findings on the best top end prop ?

    btw i did a search and couldnt find the answer

    thanks in advance

    .
    Solas 16/21 is 1.5mph ish better than stock just, but slower out of the hole!!

    But I say stay STOCK , keep load of the pump bearings, and do you housing at the same time , as the prop is only halve the equation!!

    Waz

  3. #3
    GDM's Avatar
    Join Date
    Apr 2007
    Location
    Ahead Of You
    Posts
    389
    Quote Originally Posted by sirbreaksalot View Post
    Solas 16/21 is 1.5mph ish better than stock just, but slower out of the hole!!

    But I say stay STOCK , keep load of the pump bearings, and do you housing at the same time , as the prop is only halve the equation!!

    Waz
    what should i do to the housing ?


    .

  4. #4
    Take the time to smile sirbreaksalot's Avatar
    Join Date
    Jun 2007
    Location
    Brisvegas
    Posts
    4,157
    +1
    598
    Quote Originally Posted by GDM View Post
    what should i do to the housing ?


    .
    send it to impros and have it resleeved so as to make sure the clearance is good, It will reduce cavitation heaps

    Waz

  5. #5
    GDM's Avatar
    Join Date
    Apr 2007
    Location
    Ahead Of You
    Posts
    389
    Quote Originally Posted by sirbreaksalot View Post
    send it to impros and have it resleeved so as to make sure the clearance is good, It will reduce cavitation heaps

    Waz

    thanks , someone else (in a private message)also just told me to send my pump to impros

    he suggested to let them do my pump , and repitch a stock prop to skips specs

    .

  6. #6
    SHO stopper palmbeach jesse's Avatar
    Join Date
    Nov 2007
    Location
    palm beach fl
    Posts
    3,225
    Quote Originally Posted by GDM View Post
    thanks , someone else (in a private message)also just told me to send my pump to impros

    he suggested to let them do my pump , and repitch a stock prop to skips specs

    .
    YES... This is exactly what I did... Waiting for it to come back any day...

  7. #7
    GDM's Avatar
    Join Date
    Apr 2007
    Location
    Ahead Of You
    Posts
    389
    Quote Originally Posted by palmbeach jesse View Post
    YES... This is exactly what I did... Waiting for it to come back any day...

    what is the turn around time ?

    i want to head to florida mid january so im worried if i send out my pump this week i may not get it back in time

    im goann call over there

    worst case scenerio i send it to him late febuary when i get back from florida , but that means ill be running like $hit in florida(my prop is hammered plus with over 200 hours my pump probably needs attention)

    .

  8. #8
    Take the time to smile sirbreaksalot's Avatar
    Join Date
    Jun 2007
    Location
    Brisvegas
    Posts
    4,157
    +1
    598
    Quote Originally Posted by GDM View Post
    what is the turn around time ?

    i want to head to florida mid january so im worried if i send out my pump this week i may not get it back in time

    im goann call over there

    worst case scenerio i send it to him late febuary when i get back from florida , but that means ill be running like $hit in florida(my prop is hammered plus with over 200 hours my pump probably needs attention)

    .
    at 200hrs your pump clearances will be totally stuffed, you will be very happy with the reskts after you get it serviced

    Waz

  9. #9
    SHO stopper palmbeach jesse's Avatar
    Join Date
    Nov 2007
    Location
    palm beach fl
    Posts
    3,225
    Quote Originally Posted by GDM View Post
    what is the turn around time ?

    i want to head to florida mid january so im worried if i send out my pump this week i may not get it back in time

    im goann call over there

    worst case scenerio i send it to him late febuary when i get back from florida , but that means ill be running like $hit in florida(my prop is hammered plus with over 200 hours my pump probably needs attention)

    .
    They are fast... Maybe consider express mail...

  10. #10
    GDM's Avatar
    Join Date
    Apr 2007
    Location
    Ahead Of You
    Posts
    389
    Quote Originally Posted by palmbeach jesse View Post
    They are fast... Maybe consider express mail...

    im callin him on moday fo sho


    .

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. best prop for my heavy ski
    By NightmareRXT-x-AS in forum 4-Tec Performance
    Replies: 2
    Last Post: 01-01-2015, 09:24 AM
  2. WTB MFG display gauge for a 2007 Ultra 250
    By seatsR4toilets in forum Kawasaki Classifieds
    Replies: 1
    Last Post: 10-14-2009, 09:31 AM
  3. Some Parts and Accessories for My 07 Ultra 250 are for Sale
    By ercBOOSTED in forum Kawasaki Classifieds
    Replies: 6
    Last Post: 08-20-2009, 04:59 AM
  4. How I got my 2007 Ultra for $1000
    By Gappa in forum Kawasaki PWC Performance (4-stroke)
    Replies: 30
    Last Post: 06-14-2009, 08:10 PM
  5. ULTRA 150 complete top end kit for 1 cylinder, used, good shape
    By turbocycle in forum Kawasaki Classifieds
    Replies: 0
    Last Post: 05-29-2008, 08:25 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •