Thread: Identify this part
12-15-2008, 10:25 PM #1
Identify this part
I was looking at my pics and noticed what looks like a bolt in the bottom of case under crank in the oil galley. If you zoom in, you can see what appears to be a bolt sitting upward.
I did not loose any bolts that i know of in disisembly, so what is this part?????
12-15-2008, 10:33 PM #2
Whatever it is... get it out of there
12-15-2008, 10:38 PM #3
Not supposed to be there. But where it is supposed to be, that's for you to decide.
12-15-2008, 10:52 PM #4
I want be able to sleep thinking about it where it came from?????????
Glad i noticed it in the pic, but where did it come from.
Will try to remove and post pic.
12-15-2008, 10:58 PM #5
I hear ya there
12-15-2008, 11:00 PM #6
Yeah, it kind of looks like the screw used to install the Rotax IC bracket into the hull.
12-15-2008, 11:01 PM #7
If i have to remove the fly wheel I will.
Thats if i can not get i out otherwise.
I was trying to remove stock oil jet with dent puller but dont remember loosing screw.
I know its not at stock fly wheel bolt as i got all those on bench.
12-15-2008, 11:01 PM #8
- Join Date
- Nov 2007
- Odessa, TX
12-16-2008, 12:44 AM #9
12-16-2008, 01:06 AM #10
When you took the picture, all of the flywheel bolts were out and there's a paper towel in there too. The '03 engines had a drain plug near there, but '04s and later don't. Are you sure that one of the flywheel bolts didn't get caught up in the paper towel and pulled out when you took the towel out?... Ron
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Drkvampire2001 in forum Polaris Open DiscussionReplies: 1Last Post: 06-12-2012, 09:52 PM
By ghlenz in forum 4-Tec PerformanceReplies: 5Last Post: 04-30-2012, 10:01 PM
By blkturbo! in forum 4-Tec PerformanceReplies: 8Last Post: 04-09-2011, 09:11 PM
By Water Rat in forum 4-Tec PerformanceReplies: 10Last Post: 08-21-2008, 07:23 PM
By vduzin12 in forum 4-Tec PerformanceReplies: 4Last Post: 06-24-2008, 11:06 PM