12-18-2008, 10:42 PM #1
FS: Rotax Racing , Riva, Stock, SCs, Seadoo Centre, Hydro-Turf parts
Cleaning out what I have in my garage. For paypal add 3.5%
Stock Front Motor Mount X2 - $40ea + Shipping
one out of a 2005 RXP and the other out of a 2008 RXP-X both weren't in the skies for very long.
Hydro-Turf Seat Cover Red/Grey/Black - $100 Shipped
Brand new never installed
Hydro-Turf Seat Cover White/Grey/Black - Sold
Stock 83mm RXP Venturi Nozzle - $75 + Shipping
Bailer tubes have been filled
Stock RXP Pump - Sale Pending
2008 RXP-X Orange Rear Grab Handle - Sold
2008 RXP-X Orange Top Storage Lid - Sold
B-kit SC - $950 + shipping
2004 RXP Housing, 06-07 Rebuild kit(was rebuilt back in the spring), Seadoo Centre metal washers, roughly 25-30hours on it. Has been drilled and taped so you can hook up a boost sensor and also comes with a R&D 4" air intake adapter. Clutch slip as of today is 9foot lbs or 108 lbf*in. By Seadoo Specs in the book it's considered a "New Supercharger" (89 to 150 lbf*in or 10 to 17 N*m). At the SC I was seeing 19lbs of boost and at the IC 15.5lbs at 8750rpms.
A-kit SC - $600 + Shipping
2005 RXP Housing, 06-07 Rebuild kit(it was rebuilt late fall of 2007) Seadoo Centre Metal Washers ,includes Stock Wheel, roughly 45hours on it. Clutch slip as of today is 6 foot lbs or 72 lbf*in. By Seadoo Specs it's just within spec as a "Break-In Supercharger"(71 to 97lbf*in or 8 to 11 N*m). Probably wouldn't hurt to rebuild it. I should be getting a new set of spring washers that I can throw in with it.Extremely light weight Anodised billet aluminium, superior protection against corrosion, makes 0.7 bar boost = 10lb
Easily installed on OEM housings. Suits RXP, RXT & GTX, , bolts straight in with no modifications to the supercharger housings. Comes with a precision made washer for under the supercharger nut to keep the balancing perfect.
Riva Gen 1 Intercooler Kit - $800 + Shipping
55 hours on the IC and about 5 on the aluminum piping. The IC kit was bought new from Riva in 2006 and Aluminum piping/b/o valve block off plate in August 2008. Comes with Riva Gen 1 IC, Mounting Bracket, New Aluminum Piping with Blow-off valve block off plate, all couplers + clamps and water fittings. Only thing you would need is a Stock IC block off plate. Also has been drilled and taped so you can hook up a boost sensor.
Stock Thermostat X2 - $70ea + Shipping
One out of a 2005 RXP(around 35hours) and the other out of a 2008 RXP-X(around 15hours)
Rotax Racing 158 Degree Thermostat - $225 Shipped
Came off of my RXP-X when I went open loop. Roughly 50 hours total on it.
Rotax Racing Heavy Duty Front Motor Mount -Sold
Pictures of the above parts to follow. If you have any questions feel free to pm me.
Within the next few weeks I should also have a 2005 Stock SC with a 06-07 rebuild kit, a Skat-Trak Triple Bearing Pump with SS wear ring, and a modifed stock RXP 6 injector intake manifold with 6 38lb injectors and a stock IC block off block that I used with the Rotax Igni EMS
Last edited by kenshin89; 12-21-2008 at 09:43 PM. Reason: Update
12-18-2008, 11:08 PM #2
Hydro-Turf Seat Cover Red/Grey/Black
Finished Hydro-Turf Seat Cover Example
Rotax Racing 158 Degree Thermostat
Stock Front Motor Mounts
Last edited by kenshin89; 12-19-2008 at 01:28 PM. Reason: Updating Pics
12-18-2008, 11:26 PM #3
- Join Date
- Jan 2006
- Rydal, Georgia U S A
Seat cover white gray and black...is it NON-slip? Top lid...is the tab broken on the hinge side? I want the rear handle too. call me 404-803-4280
12-19-2008, 12:03 AM #4
Stock 83mm RXP Venturi Nozzle
Stock RXP Pump
Riva Gen 1 Intercooler Kit
12-19-2008, 12:06 AM #5
12-19-2008, 01:29 PM #6
Parts list updated.
12-19-2008, 09:27 PM #7
12-20-2008, 12:00 AM #8
12-20-2008, 09:06 AM #9
I saw hyrdroturf stuff. You dont have mats for an rxp do you?
12-20-2008, 10:46 AM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By mrracing in forum 4-Tec PerformanceReplies: 40Last Post: 09-27-2012, 02:55 PM
By SCR in forum Sea Doo ClassifiedsReplies: 1Last Post: 08-10-2009, 01:27 AM
By Poppa Dawg in forum Sea Doo ClassifiedsReplies: 0Last Post: 07-28-2009, 12:30 PM
By Tony Kwolek in forum Sea Doo ClassifiedsReplies: 4Last Post: 12-18-2008, 08:35 AM
By pwc guru in forum Sea Doo ClassifiedsReplies: 2Last Post: 05-05-2008, 08:58 AM