12-19-2008, 01:03 PM #1
fs- 06 blk & gold trim rxp w/ alum triton trailer 6999.00
Ski has 4 hours on rebuilt engine.
Mitch411rxp can back me up.
New oil pumps, head gasket, all new rings and 1 piston new oem,
stretch bolts on flywheel, shims under the valve springs, new crank and rod bearings
crank and block was purchased used from mitch- perfect condition
I broke the motor in for 3 hours and cranked her up- gps's 69.84 mph
mitch & yellow jacket was there.
has a solas prop and riva 3 inch air intake turning 8140-8180 at 70mph 65 degrees
ski comes with a triton alum trailer- I have title for both in hand
I was going to hold onto this ski until spring, but winter sale 6999 firm with trailer
reverse bucket, ride plate holes, wear ring and water intake grate have'nt been touched so 72 mph is very possible for less than 200 bucks
I believe the ski has 80ish hours on the hull and I know 5 or less hours on the motor and oil pumps. I parked the ski a month ago so I don't have any pix, but if your serious I'll get off my butt and take some.
12-31-2008, 10:24 PM #2
- Join Date
- Jun 2007
06 rxp for sale
I t will help let see some pictures.
01-08-2009, 08:47 AM #3
if some is serious about purchase pix will be supplied. Right now I'm focusing on the sale of my rxp-x. Beside every one knows what a black rxp looks like.
01-08-2009, 07:40 PM #4
PICS???? also whats the actual hrs on the ski??? and yes they all look the same but over all condition can very....
01-09-2009, 02:54 PM #5
the condition is good. Definatelyt better than most. I got a guys driving from Indiana right now to purchase the rxp-x. After the X is out of the Garage I'll go to the lake house some time next week and then take pix.
01-12-2009, 08:31 AM #6
01-12-2009, 08:36 AM #7
01-12-2009, 08:46 AM #8
Update- motor rebuilt @ 69 hours by myself and Mitch Newlin (MitchRXP411)
all new rings, bearing for crank and counter balancer, timing fully retarded, all new rod and flywheel stretch bolt. New front oil pump assembly. seadoo oil used and filter.
after market upgrades:
valve train shims installed under valve seals
sc clutch tension checked and set by mitch, new needle bearing and metal washers
riva 3 in air intake
Also I peeled off the reg. number from the front top deck and cleaned off all the sticky residue.
Issues none- minor scratches on left rear view mirror and faded rear grab handle. no cracks of chip. bottom side has normal bunk scuffs and keel scratches from a couple years of use
Will need a battery and comes with an 07 triton alum trailer with bearing buddies and tongue stand.
I will sell the ski by itself for 6600 firm, but will not sell the trailer alone!
Price is firm. fresh rebuilt- fresh water ski
01-12-2009, 05:13 PM #9
- Join Date
- Feb 2006
I can say he didn't take any short cuts and the boat is in good shape too.He put everything new in it.Boat ran strong when we put it in the water up here.
01-13-2009, 08:08 AM #10
Thanks Mitch for backing my ad up. I have parts records / order recpts to prove it.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By caliburst in forum Sea Doo Open DiscussionReplies: 17Last Post: 09-07-2009, 10:31 PM
By greasyginzo in forum Sea Doo 4Tec SkisReplies: 3Last Post: 05-20-2009, 04:04 PM
By Dirty Sanchez in forum Sea Doo ClassifiedsReplies: 0Last Post: 12-19-2008, 01:03 PM
By nafd86 in forum Sea Doo 4Tec SkisReplies: 0Last Post: 08-15-2008, 12:20 AM
By T_Bundy_04 in forum 4-Tec PerformanceReplies: 3Last Post: 09-29-2007, 02:20 PM